Futaba 10PX
#243

It is a whish of thoughts because from most transmitters there was an R follow up.
But why? is the 10PX not good enough?
But why? is the 10PX not good enough?
#247
Tech Rookie

What 10ch receivers are compatible? The manual says s-fhss for 7ch, and f-4g for 10ch. I can’t find any 10ch receivers
#248

And the manual also mention that the rest of the channels are only available through SBUS so you need SBUS servo's or an SBUS to PWM channel(s) converter.
#249
Tech Apprentice

Really? I thought this is necessary only if receiver have 4 channels. Which page in the manual you find that information?
#250

Book_10PX_ENG_Letter.pdf (futabausa.com)
Page 8....
In S-FHSS mode you can use an 8ch receiver, I belive the R2008GF then you only need the sbus direct servo's or converter to connect those last channels. In T-FHSS and F-4G mode you are limited to the 4 channels and the other 6 can be connected by the SBUS. On Amazon, Aliexpress and Banggood you can find all kind of SBUS to PWM converters but also Futaba sell programable ones.
Page 8....
In S-FHSS mode you can use an 8ch receiver, I belive the R2008GF then you only need the sbus direct servo's or converter to connect those last channels. In T-FHSS and F-4G mode you are limited to the 4 channels and the other 6 can be connected by the SBUS. On Amazon, Aliexpress and Banggood you can find all kind of SBUS to PWM converters but also Futaba sell programable ones.