248LikesXray XB4 thread
12-24-2012, 02:14 PM
#618
I`ll try again.
This is how my rear tower broke:
And here`s my car:
This is how my rear tower broke:
And here`s my car:
12-24-2012, 02:38 PM
#619
4mm shock towers
These towers will be 4mm, with more material surrounding the ballstud mounting area. They will be top notch quality.
12-24-2012, 02:56 PM
#620
12-24-2012, 03:11 PM
#621
Just got back from the track for the maiden voyage of my XB4 and I had a blast!
When I was building the car I wasn't agreeing with much of what the Box clay setup was suggesting so I opted for my own setup and I was glad. There was another XB4 driver struggling for rear grip and my car was fast and consistent from the first pack, just begging to be pushed. I did not have any trouble with the diffs or towers and I took a few good tumbles, I will still probably order the NT1 gears and 4mm towers for peace of mind though. All in all, a very productive day, there is still some more speed in the car but I am very happy with how it was considering how loose the track was today.
http://forum.teamxray.com/xform/inde...D=11&setup=xb4
There is a link to my current setup. Very easy to drive with plenty of steering. If more is needed, 5-7K in the front will fix that or go up to 5K in the rear. Awesome car! The only other item I could use is a bit thicker rear sway bar. Probably going to try a 1.3 or 1.4 when I can get my hands on one.
When I was building the car I wasn't agreeing with much of what the Box clay setup was suggesting so I opted for my own setup and I was glad. There was another XB4 driver struggling for rear grip and my car was fast and consistent from the first pack, just begging to be pushed. I did not have any trouble with the diffs or towers and I took a few good tumbles, I will still probably order the NT1 gears and 4mm towers for peace of mind though. All in all, a very productive day, there is still some more speed in the car but I am very happy with how it was considering how loose the track was today.
http://forum.teamxray.com/xform/inde...D=11&setup=xb4
There is a link to my current setup. Very easy to drive with plenty of steering. If more is needed, 5-7K in the front will fix that or go up to 5K in the rear. Awesome car! The only other item I could use is a bit thicker rear sway bar. Probably going to try a 1.3 or 1.4 when I can get my hands on one.
12-24-2012, 03:31 PM
#622
TOWERS!
Yes you can pre order the towers on the 25th of December 2012 from TeamSR.co check for the link later tonight and happy holidays y'all!
12-24-2012, 07:53 PM
#624
12-24-2012, 09:49 PM
#626
Actually, its pearl white. It doesnt show in pictures, but it stands out a bit when sitting next to a plain white paintjob. This is how its done when my painter dont have time
12-25-2012, 02:11 AM
#629
12-25-2012, 07:14 AM
#630
CONTACT XRAY ABOUT YOUR ISSUES PLEASE
Contact XRay customer service at [email protected].
Last edited by losi b; 12-25-2012 at 09:08 AM.