V-ONE S Thread
#3856
Tech Apprentice
I don't know, but there definaterly no loss in power. I will take it to the lhs tomorrow.
Ryan
Ryan
#3857
It could be your fuel lines to long so when the tanks gets emptier it makes it harder to build up pressure in the tank so fuel delivery becomes a problem....
But i would check for cracks first.
But i would check for cracks first.
#3858
Tech Apprentice
I have short fuel lines.
Ryan
Ryan
#3859
Check for cracks in the tank then.... A good way is to block both fuel lines and pressure lines. Then put it in under water and if you get airbubbles coming out then you have yourself a leak.
#3860
Tech Apprentice
It was the primer, so i sealed it up. I dont have a working primer anymore but i dont care I never really used it, so that O.K.
Ryan
Ryan
#3861
Cool
#3862
Tech Apprentice
Yeah it was going hell fast to.
Ryan
Ryan
#3863
Tech Rookie
Hi guys.........
I have change my piston and sleeve......... since at my LHS only supply 10% and 25% Model Technic Dynaglow..... maybe I will use 10%........not yet break in the engine
can anybody tell me top speed produce by10% and what is the needle setting......I am using GS15R
I have change my piston and sleeve......... since at my LHS only supply 10% and 25% Model Technic Dynaglow..... maybe I will use 10%........not yet break in the engine
can anybody tell me top speed produce by10% and what is the needle setting......I am using GS15R
#3864
Tech Apprentice
Are you using a 2 speed? I run 1 to 1 1/2 turns out depending on conditions.
Ryan
Ryan
#3865
Tech Rookie
Hi....... VoneS II
yes i am run with 2 speed.......... you needle is 1 1/2 and your nitro % ?
yes i am run with 2 speed.......... you needle is 1 1/2 and your nitro % ?
#3866
Tech Apprentice
I run 16% nitro. The fastest Ive ever got my car running was 102 KPH but that as perfect conditions with a masive straight. Mornally its around the 92-97 mark. If you get the masive 26 and 23 pinion gears it will 140+ KPH but it lacks in acceleration.
Ryan
Ryan
#3867
Tech Apprentice
Have you done the mod to the second gear?
Ryan
Ryan
#3868
Tech Apprentice
Sorry about the three posts in a round. What's your opinion on the alloy:rear plate, arms, knuckle arms and the rear R surport?
Ryan
Ryan
#3869
It's offical
Im now going to sell my car since i just went out and brought a new bike... If you guys know anyone please pm me... thanks
#3870
Tech Rookie
Originally posted by VoneS II
Have you done the mod to the second gear?
Ryan
Have you done the mod to the second gear?
Ryan