OFNA GT-V2e 1/8 GT
#332
[QUOTE=Jspeed;12406317]+1 and after watching how the XO1's go airborn its a pretty risky set-up.
But hey, if he wants to spend the money and energy to make the tooling & parts? Go for it!
http://www.youtube.com/watch?v=SCblMr7dSdU
If you watch this vid closely he loses control early in his run, then tries to correct at which point your going along for the ride.One of the main reasons i work so hard at getting my car to track straight.A lot of blow overs are caused by driver error.
Roll, Point & Pin.Chris
But hey, if he wants to spend the money and energy to make the tooling & parts? Go for it!
+ YouTube Video | |
http://www.youtube.com/watch?v=SCblMr7dSdU
If you watch this vid closely he loses control early in his run, then tries to correct at which point your going along for the ride.One of the main reasons i work so hard at getting my car to track straight.A lot of blow overs are caused by driver error.
Roll, Point & Pin.Chris
#333
#334
Just need to know what else I need if I decide to join the "Highspeed GT Club".[/QUOTE]
"Nerves of Steel",jokes aside I'm just one example of making it to 100mph club, if there's such a thing.My set up, pinions, bat, etc. are all here for the taking, so i won't itemize.Good luck Chris Haberland.
"Nerves of Steel",jokes aside I'm just one example of making it to 100mph club, if there's such a thing.My set up, pinions, bat, etc. are all here for the taking, so i won't itemize.Good luck Chris Haberland.
#336
I bought these diff gears. http://www.nitrohouse.com/ofna_gt-v2e_hop-ups.html
Then I bought a 34t 8mm bore mod 1 pinion from keshaw designs, im hoping it shows up today or tomorrow. This will replace the factory spur setup on the factory shaft. Ill be trying 34/25.
You have the pro car or the rtr? I just put these new shocks together with 80wt shock oil in all 4 what fluid are you guys running? The 6 hole pistons take some heavy fluid if you dont want the front to scrape when you brake hard. Sexy!
Then I bought a 34t 8mm bore mod 1 pinion from keshaw designs, im hoping it shows up today or tomorrow. This will replace the factory spur setup on the factory shaft. Ill be trying 34/25.
You have the pro car or the rtr? I just put these new shocks together with 80wt shock oil in all 4 what fluid are you guys running? The 6 hole pistons take some heavy fluid if you dont want the front to scrape when you brake hard. Sexy!
#337
Ah gotcha, i'm going to order one self, no need for a spindle,simple.Chris
#338
Tech Elite
iTrader: (2)
Hi Jstall,i use 40wt up front 70wt rear.Braking and the body scraping is an issue, thats why my car gets so far away on me, as i pump my brakes to avoid this.I like to keep the front end and or shocks as soft as possible, absorbs anomalies on the road surface and it allows the down force to push the chassis and body down as close to the road as i can get, hence less air flow under the car when i make a pass.It's a compromise i will live with for now.Cheers Chris
#339
Thats weird, I tried 40, 60, 80 and 80wt still feels pretty soft for bladder shocks. The 6 hole pistons feel like nothing with 40wt. I've been into off road since 95 and I normally run pretty light also. I had to make a special trip to the hobby shop to get 80wt. I was running 80wt in the stock rtr shocks also and it still felt just a tiny bit firmer than stock. Anyway all the roads around here are pretty bumpy so 80wt feels pretty good to me and actually has some dampening and not just all spring. Everyone's got a different style and thats what I love about the mechanics of RC. I'm still in search of a perfect location....
#340
Hi Jstall,i use 40wt up front 70wt rear.Braking and the body scraping is an issue, thats why my car gets so far away on me, as i pump my brakes to avoid this.I like to keep the front end and or shocks as soft as possible, absorbs anomalies on the road surface and it allows the down force to push the chassis and body down as close to the road as i can get, hence less air flow under the car when i make a pass.It's a compromise i will live with for now.Cheers Chris
Too stiff?
I like the way you reduced the spoiler angle, I was thinking of doing something similar with another Warrior body mold.
Your car does look very smooth in your video top speed video runs.
#341
#342
Tech Elite
iTrader: (2)
Ok, 34t pinion for a spur is installed. The nearest lathe for me is 35mi one way so I carefully used a my dremal to remove the shoulder where the stock spur adapter sets against and elongated the flat. Look for about a .335 inside gap from the far shoulder to the pinion and make sure all 8 diff riser screw holes line up perfectly or the shaft will bind when tightened down and create serious drag/bind.
Last edited by Jstall7543; 08-03-2013 at 04:32 PM.
#343
Sharp,very nice.Liking the fender cut, i may just do that.Cheers Chris
#344
Tech Elite
iTrader: (2)
I just test drove it to 50mph and everything seemed ok but maybe the rear is to stiff with the new springs. Super fast now with the new gearing lol like 50 at 1/4 throttle.... now the fear is setting in.... I blacked out the center spoke on the grp's and I think it looks tight. Looks like I cut it out but didn't. Optical illusion.
#345
Ok, 34t pinion for a spur is installed. The nearest lathe for me is 35mi one way so I carefully used a my dremal to remove the shoulder where the stock spur adapter sets against and elongated the flat. Look for about a .335 inside gap from the far shoulder to the pinion and make sure all 8 diff riser screw holes line up perfectly or the shaft will bind when tightened down and create serious drag/bind.
Like that cut too, reminds me of the old Porsche LeMans cars.
Thanks for sharing, good luck with your top speed runs!