Serpent 710
05-12-2004, 07:35 PM
Originally posted by Sow&Steady
Well, I just checked ... a lot of uploads but all cars and no babes.
Well, I just checked ... a lot of uploads but all cars and no babes.
http://www.mytsn.com/publ/psimage.as...=10074&psid=10
Last edited by JustRace; 05-12-2004 at 07:49 PM.
05-12-2004, 07:43 PM
Originally posted by JustRace
How's this for a pit babe? She's got that snake in her hands.
How's this for a pit babe? She's got that snake in her hands.
05-12-2004, 07:44 PM
Originally posted by jfc_tech
now...thats a nice pink color
now...thats a nice pink color
05-12-2004, 07:44 PM
Tech Fanatic
Originally posted by JustRace
How's this for a pit babe? She's got that snake in her hands.
How's this for a pit babe? She's got that snake in her hands.
It has a very big "twin-heatsink" !!
05-12-2004, 07:45 PM
Originally posted by JustRace
How's this for a pit babe? She's got that snake in her hands.
How's this for a pit babe? She's got that snake in her hands.
05-12-2004, 07:47 PM
Tech Fanatic
iTrader: (2)
InitialD,
When you say 4mm under on your setup sheet is that the lowered, middle, or raised? And 1mm caster is all the shims to the rear except the smallest one?
When you say 4mm under on your setup sheet is that the lowered, middle, or raised? And 1mm caster is all the shims to the rear except the smallest one?
05-12-2004, 07:49 PM
Originally posted by GoldFinger
Cool, this snake would never overheated.
It has a very big "twin-heatsink" !!
Cool, this snake would never overheated.
It has a very big "twin-heatsink" !!
05-12-2004, 07:50 PM
Originally posted by JustRace
How's this for a pit babe? She's got that snake in her hands.
http://www.mytsn.com/publ/psimage.as...=10074&psid=10
How's this for a pit babe? She's got that snake in her hands.
http://www.mytsn.com/publ/psimage.as...=10074&psid=10
05-12-2004, 07:53 PM
Originally posted by kreidel
When you say 4mm under on your setup sheet is that the lowered, middle, or raised?
When you say 4mm under on your setup sheet is that the lowered, middle, or raised?
I actually just wanted to try it out and it felt OK. I'm wanting to try out the highest roll center setting (as what I have in my diff setup) with the solid front. I think it will make the car more responsive in the front. I found the car (with front diff) to be very nice in the chincanes with a high front roll center.
Originally posted by kreidel
And 1mm caster is all the shims to the rear except the smallest one?
And 1mm caster is all the shims to the rear except the smallest one?
05-12-2004, 07:54 PM
I'm getting 8min. + on a tank under race conditions and still testing.
05-12-2004, 07:55 PM
Originally posted by Pit-racer
I'm getting 8min. + on a tank under race conditions and still testing.
I'm getting 8min. + on a tank under race conditions and still testing.
05-12-2004, 07:56 PM
Tech Fanatic
Originally posted by Pit-racer
I'm getting 8min. + on a tank under race conditions and still testing.
I'm getting 8min. + on a tank under race conditions and still testing.
05-12-2004, 07:59 PM
Originally posted by Pit-racer
I'm getting 8min. + on a tank under race conditions and still testing.
I'm getting 8min. + on a tank under race conditions and still testing.
nice 710!
05-12-2004, 08:03 PM
Originally posted by InitialD
Damn. Is that a Novarossi 52606 pipe?
Damn. Is that a Novarossi 52606 pipe?
05-12-2004, 08:09 PM
Originally posted by GoldFinger
Are those Palmaris is still using Nova carb ?
Are those Palmaris is still using Nova carb ?