nikos2002

iTrader: (30)

b-man - these are designed to be used in all forms of racing. They are a huge improvement over the old style motors. More power, more rpm. Plus we have three different tuning rotors to help fine tune for your needs.

Baja-Boy

iTrader: (12)

After running the motors for some time now I must say I'm very impressed. the 17.5 with the 12.5 HT is really a force to be reckoned with. you REALLY won't be dissapointed.

nikos2002

iTrader: (30)

Nice to hear Ian - first shipment of 17.5's sold through in a little over a month. Next shipment is due next week. Still have good stock on most mods, but again that shipment is coming next week!!

trigger

iTrader: (15)

My stock 17.5 runs great at 40 degrees , can't wait to get a high torque rotor to try now. I put one in my 13.5 that I have yet to run.

clint

iTrader: (24)

I have ordered both the 12.5 HT and 13mm outlaw rotors for my 17.5, cant wait to try these out.. also have a 21.5 BE on the way for my Sportsman sedan TB EVO5 should be a killer combo..

o2 designs

Why or when are stators going to be available ? I've been trying to buy one for 2 weeks with no luck . Amain does not have any and was told by Viper they are not available . Mean while I've got a 3 week old door stop because of a lack of parts.---Bob

nikos2002

iTrader: (30)

Bob - check your PM

nikos2002

iTrader: (30)

So, I have emails from ROAR's Technical Delegate and President telling me the motors are legal -- but it still has not been posted on ROAR's official website.

If anyone needs a copy of the emails to verify with their race director or hobby shop to show that the motors have been approved by ROAR please feel free to contact me at - [email protected]

Thanks!!!

jiggen5354

just got a viper black edition 10.5 to match the vtx 1 esc. any recommendations for rollout and timing to use?

the motor will be used in 1/12th blinky on a small technical track with a 22m straight. compared to the lrp x20 with the 4 dot insert and 88 rollout, the viper motor seems a bit lacking.

thanks in advance.

nikos2002

iTrader: (30)

jiggen, I apologize I don't have an exact roll out number to tell you to start with, that is something than can differ a bit from track to track. I would start with a gearing you have run before and monitor performance and temperature.