TQ Racing SX8
#395
Tech Fanatic
I use Losi oil = 50 front 40 rear.
#398
Tech Addict
iTrader: (17)
Got my Buggy Finished! Very Nice Easy build. Going to hit the track today for some testing/practice. Have Flour-Yellow wing I need to drill out and mount up as well. Planning on racing the new SX8 Sunday, at a local club race.
For more pictures go here: http://s331.photobucket.com/albums/l467/NorCalRCRacer/
For more pictures go here: http://s331.photobucket.com/albums/l467/NorCalRCRacer/
#399
Looks nice Carlos, what set up are you starting with?
#400
Tech Addict
iTrader: (17)
Thanks KDub!
Basically I'm running Tony's setup (posted on the TQ web site) other than the diff oils. I didn't have the weights specified on the sheet. So I'm going with 5,000F, 5,000C, 2,000R.. might be a big mistake we'll see today.
I should have better selection of Diff oils today but I don't want to wait arround for UPS to show up.. So I'll change them before the race on Sunday if need be.
P.S. also running Mugen Carbon Clutch Shoes, 1.1 Kyosho clutch springs..
Basically I'm running Tony's setup (posted on the TQ web site) other than the diff oils. I didn't have the weights specified on the sheet. So I'm going with 5,000F, 5,000C, 2,000R.. might be a big mistake we'll see today.
I should have better selection of Diff oils today but I don't want to wait arround for UPS to show up.. So I'll change them before the race on Sunday if need be.
P.S. also running Mugen Carbon Clutch Shoes, 1.1 Kyosho clutch springs..
Last edited by carlosm; 08-08-2008 at 10:38 AM.
#401
My first time out I ran the exact setup you're running, it is definetely a good place to start. I now have 3/5/1 in the diffs and 50/40 with Kyosho Blue Springs in the front and light yellow springs in the rear for the shocks and it's about perfect! Good luck with your testing and let us know how it goes.
#402
yup me too.. I started at 5.5.3 and ended up @ 3.5.1 and the car was planted.
#404
Tech Initiate
Got mine out finally, practicing at the Tiltyard today. Buggy is very fast, experimenting with different tires, no changes so far. Got hit from behind in the air so hard it bent a shock shaft, even scratched some of the anodizing off the shock. So glad I have the extra shock kit! I can't tell if anyone else here has a SX8, they all look the same!
#405
Binky is suppose to be there tomorrow in the Am he will have plenty of parts and also should be running the new truggy.