will VICTOR ENGINEERING ever return?
#61
#62
my victor is gone some year ago, but as i remind you just have to choose voltage cutoff programm and enter for 2s lipo 8.4 v, then victor will charge to 8.4 and reduce charging current down while maintaining 8.4v just like every other lipo charger- BUT victor can load with 12 - 15 Ah which most other chargers canīt !
victor hi-iq are still some of the best chgargers out there.
victor hi-iq are still some of the best chgargers out there.
#63
my victor is gone some year ago, but as i remind you just have to choose voltage cutoff programm and enter for 2s lipo 8.4 v, then victor will charge to 8.4 and reduce charging current down while maintaining 8.4v just like every other lipo charger- BUT victor can load with 12 - 15 Ah which most other chargers canīt !
victor hi-iq are still some of the best chgargers out there.
victor hi-iq are still some of the best chgargers out there.
That would indeed be cc/cv.
Indeed, Victor rules
#64
yes, i had iq3000 installed and am sure my super iq did the same, i also think the hi-iw sr software did this .
if i still had a working victor i would never sell it.
if i still had a working victor i would never sell it.
#65
Tech Rookie
I'm just getting back into the hobby after ~17 years! While getting out my OLD stuff the use, there was my Victor Engineering charger. Mine has been upgraded to a Super 2 IQ. And I have the Multiplexor attached.
The charger still works...I have been trying to revive my NiCads.
I too would be very interested to know if this charger can be used for LIpo's, and how to make the settings for a 1s and 2s LiPo battery.
I'd also like info on charging/discharging NiMH batteries.
Thanks,
Max
The charger still works...I have been trying to revive my NiCads.
I too would be very interested to know if this charger can be used for LIpo's, and how to make the settings for a 1s and 2s LiPo battery.
I'd also like info on charging/discharging NiMH batteries.
Thanks,
Max
#66
Tech Rookie
My Super 2 IQ fcc
I don't have any upgrade parts list, pretty sure I used to years ago. I've modified quite a few IQs and repaired many in the West Coast of Canada.
I also started drawing the schematics but lost interest before they were done.
Its funny the red faceplates command more value but its been that way for a long time. I bought just the faceplates from Maxtec years ago. Sold off my IQs that had them years ago as well. The Super IQ/SuperIQfcc/Super2IQfcc/IQ3/IQ3000 all have the same internal hardware plus or minus a fet thats easily added, and of course an eprom. If anyone needs/wants IQ3000 firmware I can help, I can also add a custom power up message and a power on password if you like.
Victor always sanded the part #'s off the chips, the last production run that Maxtec did had the numbers left on the chips. Before that even happened though I had already figured them all out as in most IQs you can read at least one or two of them.
I do still have spare parts, CPU, ram, backup caps, regulators, fets.
Here are all the chips looking from the heatsink(spacing likely messed from posting it but still useful)
74ls04 74ls32 74ls74
27c256/ 74ls373 86c71/81/91 UM6116-20 74ls257 74ls257 CD4051 CD4051 CD4051
27c512
TL082
74ls10 74ls32 74ls390 74ls139 ICL8069/ICL7135
LM385-1.2
I also started drawing the schematics but lost interest before they were done.
Its funny the red faceplates command more value but its been that way for a long time. I bought just the faceplates from Maxtec years ago. Sold off my IQs that had them years ago as well. The Super IQ/SuperIQfcc/Super2IQfcc/IQ3/IQ3000 all have the same internal hardware plus or minus a fet thats easily added, and of course an eprom. If anyone needs/wants IQ3000 firmware I can help, I can also add a custom power up message and a power on password if you like.
Victor always sanded the part #'s off the chips, the last production run that Maxtec did had the numbers left on the chips. Before that even happened though I had already figured them all out as in most IQs you can read at least one or two of them.
I do still have spare parts, CPU, ram, backup caps, regulators, fets.
Here are all the chips looking from the heatsink(spacing likely messed from posting it but still useful)
74ls04 74ls32 74ls74
27c256/ 74ls373 86c71/81/91 UM6116-20 74ls257 74ls257 CD4051 CD4051 CD4051
27c512
TL082
74ls10 74ls32 74ls390 74ls139 ICL8069/ICL7135
LM385-1.2
I found that the motor amp/break in feather won't work
any ideas on the fix or who to send it to to fix.
PS which of the fets U have listed would be specific to the motor features
Thanks
#67
Is this the same victor that made the esc's that never gave any problems?
#68
Just in case. ive got a Victor HI IQ witht the little black moduals that plug in to the top. wires. extra eprom, leather carring case and i did the remote power hook up. worked great the last time i used it. just wondering what it would be worth? Im looking to sell it or trade it.
#69
Tech Rookie
maxtec 3000 manual
Does anyone have a maxtec 3000 manual that can email me a copy or send me a copy somehow. I live in the US in ohio. I bought a 3000 on ebay with no manual and need one.
#70
Tech Fanatic
iTrader: (1)
You may be able to get it from this guy
http://www.rccar.com.au/victor_engineering.html
I had a link to it but it's on my old computer, that I don't have any more, I'll see if I can find it
http://www.rccar.com.au/victor_engineering.html
I had a link to it but it's on my old computer, that I don't have any more, I'll see if I can find it
#72
Still no whizzkid helping us IQ-lovers out with Lipo firmware????
#74
I will find a local person to do the repairs on mine, but does anybody have a parts list with specifications of the the items on the board? If I have a local guy fix it, he may need some info.
Sam Capri from Canada told me some years ago, the software is about 95% lipo ready, Vic never finished it. Some wiz kid may step up and resolve this issue...
I have a whole bunch of manuals on these things. I will try next week to post them online. I even have a flier for the Quad IQ ( I have 2 of those).
Sam Capri from Canada told me some years ago, the software is about 95% lipo ready, Vic never finished it. Some wiz kid may step up and resolve this issue...
I have a whole bunch of manuals on these things. I will try next week to post them online. I even have a flier for the Quad IQ ( I have 2 of those).
#75
Tech Elite
iTrader: (1)
I will find a local person to do the repairs on mine, but does anybody have a parts list with specifications of the the items on the board? If I have a local guy fix it, he may need some info.
Sam Capri from Canada told me some years ago, the software is about 95% lipo ready, Vic never finished it. Some wiz kid may step up and resolve this issue...
I have a whole bunch of manuals on these things. I will try next week to post them online. I even have a flier for the Quad IQ ( I have 2 of those).
Sam Capri from Canada told me some years ago, the software is about 95% lipo ready, Vic never finished it. Some wiz kid may step up and resolve this issue...
I have a whole bunch of manuals on these things. I will try next week to post them online. I even have a flier for the Quad IQ ( I have 2 of those).