T.O.P. Racing "Photon" 1/10 EP Touring Car
#2926
Tech Champion
iTrader: (103)
Good and bad day today. I TQ'ed the first round by 3 seconds and it held until the third round. I knocked another 4 seconds off my TQ time for a 7 second lead over 2nd and 3rd place. First corner in the A-main and 2nd place took me out. After getting knocked back to last place on the grid, I moved back up to 4th place for the finish. Car was very good overall with a mysterious chatter, that I think is from the carpet. I was not the only car with this problem. Still very impressed with the car and the way it handles.
#2928
I have mounted my transponder forward of the servo, using one of the spare holes in the lower deck. Out of the way of everything, and mounted down low.
#2930
Mine is in front of the battery with the ears cut off.
#2931
There is LOADS of room infront of the servo for this PT.
#2933
mrrcguy, and my self will be there for sure. Usually Josh is there as well.
#2934
Tech Champion
iTrader: (103)
http://www.youtube.com/watch?v=Ew_SXYuGVbg
Link to some practice today. 6-9 minute mark is pretty good vid of my car. The all white car is a WGT car running 2s lipo / 17.5. I'm the white car with the red black side running 17.5 with rubber tires.
Link to some practice today. 6-9 minute mark is pretty good vid of my car. The all white car is a WGT car running 2s lipo / 17.5. I'm the white car with the red black side running 17.5 with rubber tires.
#2936
Wich chassis attempt between 2.0mm lipo, 2.5mm standard & 2.5mm lipo for mod-rubber on med/hig grip carpet track?
#2940
Tech Champion
iTrader: (103)
I haven't had any issues with the stock spool and plastic outdrives. They did come out with the steel outdrives that people seem to like. TiR has a titanium spool for use with the yokomo pulley and Rosche also has one anodized red. I'm looking to get the rosche spool myself.