SERPENT 120
#527
Tech Apprentice
iTrader: (1)
Question on servos (I know it has been talked to death). I run mounted to the chassis with tape right now. This enables me to use the Hitec HS-81 micro servo with the Calandra Pro-Strut front end. How much would that effect the geometry on this car?
Thanks
Jeff
For the record this micro servo does 0.11 sec/ 60 deg. @ 4.8V, 36.1 oz/in @ 4.8V, and only weighs 16.6g.
Thanks
Jeff
For the record this micro servo does 0.11 sec/ 60 deg. @ 4.8V, 36.1 oz/in @ 4.8V, and only weighs 16.6g.
#528
New S120 DIFFERENTIAL WASHER TUNGSTEN arrived !
#529
Will anyone from Serpent Company be at EC 1/12?
#530
Do you mean the EC modified in Italy or the EC stock in Holland?
I'm certan there will be people from the factory present at the Holland race.
I would presume the Italian distributer being present at the Italian race but that I cannot confirm.
I'm certan there will be people from the factory present at the Holland race.
I would presume the Italian distributer being present at the Italian race but that I cannot confirm.
#532
I mean EC modified in Italy.
All i want to know is if there will be possible to buy spare parts.
#533
I guess you could try to contact the italian distributer.
E-mail: [email protected]
Web: http://www.sprintrc.it
#534
Suspended
will anyone from serpent be at the snowbirds?
#535
Tech Regular
#537
Got our first shipment of cars in yesterday and just got done building and testing an s120 for a customer here at 360 RC Speedway. I was impressed with the car, Serpent did a nice job with it. Had a couple problems with part fitment and some missing hardware in the kit but otherwise can't really complain.
Got a chance to run a couple packs with it, I am not a t bar guy myself but it felt good and ran within a couple tenths of where it needs to be.
-Donny Lia
Got a chance to run a couple packs with it, I am not a t bar guy myself but it felt good and ran within a couple tenths of where it needs to be.
-Donny Lia
#538
Suspended
#539
Tech Elite
iTrader: (8)
do you have the new cars in yet?
Also, anybody that ordered an original kit, drop us a line. We're going to hook you up with the extra 3 and the 9 degree arm mounts for free.
All the newest kits from us include the 3 and 9 degree mounts, and we have marked them accordingly.
Direct link to S120 cars and parts.
http://www.stormerhobbies.com/cgi-bi...umb=on&smode=0
.
.
.
#540
Where do you buy parts for yours s120?
Do you know online shop anywhere in the world where are all spare and tuning parts instock or they can very fast get them?
Do you know online shop anywhere in the world where are all spare and tuning parts instock or they can very fast get them?