Losi 1/10 TEN-SCTE ARR 4x4 Short Course Truck Thread
Tech Adept
iTrader: (16)
Tech Regular
iTrader: (94)
Anyone know if the diff shims are available yet? i looked up the part # in the breakdown and come up with nothing. Is there shims out that will work? talking about the shims for ring and pinion spacing.
I've been keeping an eye on this thread & done some searching even though I don't have a SCTE.....yet. I was wondering if an old school Mamba Max would handle this truck running the 1410 motor? I have a couple sitting around & it would be great if I could get it going with some of the electrics I already have. I will probably upgrade to the RX8/Pro4 combo at some time in the future,but definately cannot afford them & the truck right now. Thanks for any input
any 5x8 shim will do the job. search A-main and you can find some I use a set from ofna.
Tech Master
iTrader: (48)
I've been keeping an eye on this thread & done some searching even though I don't have a SCTE.....yet. I was wondering if an old school Mamba Max would handle this truck running the 1410 motor? I have a couple sitting around & it would be great if I could get it going with some of the electrics I already have. I will probably upgrade to the RX8/Pro4 combo at some time in the future,but definately cannot afford them & the truck right now. Thanks for any input
Tech Fanatic
iTrader: (28)
Thanks guys. That's exactly what I was hoping to hear! Now if I can just convince the girlfriend to get the truck. Been dropping hints for a while now with my B-day coming up in a couple months
Tech Fanatic
iTrader: (37)
Any one got a pic of the new rear chasis brace (torque rod) on the TLR chasis??
Tech Prophet
iTrader: (34)
Here
Tech Master
iTrader: (45)
I'm running an RX8/Pro4 4000 indoor and am in the process of setting up a second truck for outdoor using RX8/SC4X 4.5. Some of the RX8 setups on the Tekin sight reference a 42t spur. What spur is being used for this? Something from the 8ight? Part# would be great if anyone has it.
Tech Regular
iTrader: (17)
Tech Fanatic
iTrader: (37)
Tech Elite
iTrader: (50)
Game will be on a 26in flat screen at the track! It will be set up under the oak trees, you bring the burgers and beer.
But seriously we will have the game on at the track under the trees and on in my trailer.
And I for sure will have my GAME ON on the track. This Sunday could have the most Losi's ever.
But seriously we will have the game on at the track under the trees and on in my trailer.
And I for sure will have my GAME ON on the track. This Sunday could have the most Losi's ever.
I am running that exact setup in mine with a fan mounted on the esc. We run 5 min races the temps are 115 on esc and the highest on the motor was around 150 with a 16 or 18 cant remember which 1. With 2s lipo.
Tech Elite
iTrader: (176)
front driveshaft
Great product support by Losi demonstrated today. I called them about my broken center/front driveshaft pin, then they looked it up and advised that the part has been revised (which we all knew about already, thanks Ryan) and that they will send me a replacement. The only thing is that it's on backorder until the first week of Oct, LOL. It looks like I'm still going to be buying one of the old ones to get me going until then.