TLR 8ightX
|
|||
#781
*edit* I believe it’s a bitty design 4.0 body * Does anyone recognize which proline body this is? Looks like they have made them fit the x at nationals
Last edited by Alexrit; 06-21-2019 at 01:35 PM.
#782
This one looks like the mugen predator body. I wonder if they have some new ones coming specifically for the x?
#783
Hopefully someone can measure one, need to know the length of the Front/Rear CVD driveshaft if possible. Part number TLR242031
https://www.amainhobbies.com/team-lo...242031/p774552
Thank you,
https://www.amainhobbies.com/team-lo...242031/p774552
Thank you,
#784
#785
Tech Rookie
Hi. You need 8 x start box adapter for use with Losi start box? Yes or no
#786
#787
Tech Rookie
#788
#790
Yes just that it’s coming but no release date, they discontinued 4.0....
#793
Phend has had some bad luck. TQ's then DNF in the main at a few big races on the main stage. 95% of the issues are not "chassis" issues. But never the less, People see TLR on the side of the car, so sometimes, you just have to take the punches from people that dont drive the car. The 3 TLR drives out my way have not had any issues and have finished all of our "big" races out this way. Now that we have a good grasp on the setup, the car ROCKS!!!!!! People don't understand this was a brand new car, not just some update.
#794
Tech Regular
iTrader: (17)
Phend has had some bad luck. TQ's then DNF in the main at a few big races on the main stage. 95% of the issues are not "chassis" issues. But never the less, People see TLR on the side of the car, so sometimes, you just have to take the punches from people that dont drive the car. The 3 TLR drives out my way have not had any issues and have finished all of our "big" races out this way. Now that we have a good grasp on the setup, the car ROCKS!!!!!! People don't understand this was a brand new car, not just some update.
#795
The run them too and they are pretty darn goo IMO. Right now I back to the 5 hole pistons.