3rd Annual PRCR ROCKSTAR/AKA Short Course Series!
#31
2. Box Stock Short Course Truck
-Any current production 2 wheel drive short course vehicle may be used.
-Motor 19 turn, 17T Reedy, or 12T 550 may be used (any RTR SC motor can be used/ no brushless)
-Can use any 2 cell 7.4V lipo or 7.2V 6 cell NIMH battery pack (brushed motors may use 7 cell NIMH packs)
-Vehicle must appear to be a store bought short course kit with body off. No homemade creations using non short course parts.
-Aftermarket parts allowed RPM plastics (excluding chassis) and turnbuckles
-Stock or aftermarket parts must be made specifically for the vehicle you are running.
-Must use any body made specifically for a 1/10 scale short course vehicle.
-Must use original RTR kit tires (Kyosho, Associated, HPI, Traxxas)
No brushless motors, ok so if the kit comes with a brushless motor can you change it out for a brushed motor i.e. “-Motor 19 turn, 17T Reedy, or 12T 550 may be used”?
Battery’s, looks like brushed motors can use a 7 cell?
-Stock or aftermarket parts must be made specifically for the vehicle you are running.
So dose this mean that you can put velvet shocks on a Kyosho rtr?
-Any current production 2 wheel drive short course vehicle may be used.
-Motor 19 turn, 17T Reedy, or 12T 550 may be used (any RTR SC motor can be used/ no brushless)
-Can use any 2 cell 7.4V lipo or 7.2V 6 cell NIMH battery pack (brushed motors may use 7 cell NIMH packs)
-Vehicle must appear to be a store bought short course kit with body off. No homemade creations using non short course parts.
-Aftermarket parts allowed RPM plastics (excluding chassis) and turnbuckles
-Stock or aftermarket parts must be made specifically for the vehicle you are running.
-Must use any body made specifically for a 1/10 scale short course vehicle.
-Must use original RTR kit tires (Kyosho, Associated, HPI, Traxxas)
No brushless motors, ok so if the kit comes with a brushless motor can you change it out for a brushed motor i.e. “-Motor 19 turn, 17T Reedy, or 12T 550 may be used”?
Battery’s, looks like brushed motors can use a 7 cell?
-Stock or aftermarket parts must be made specifically for the vehicle you are running.
So dose this mean that you can put velvet shocks on a Kyosho rtr?
#33
Track to open at 4pm, Friday 18th, not noon.
see other post at PRCR main forum. Jim put a note on there tonight.
http://www.rctech.net/forum/northwes...icial-365.html
http://www.rctech.net/forum/northwes...icial-365.html
Last edited by SC Fever; 11-18-2011 at 05:54 AM.
#34
PRCR 2011 Rockstar SCT Rnd 2 videos are up
#35
Round 3 this Friday, Dec 2nd!
Reminder...
ROCKSTAR/AKA ROUND #3 Friday, December 2nd
Shop opens at Noon.
Sign ups close at 6pm.
Racing begins at 7pm.
A slight track change has been made.
See you then!
ROCKSTAR/AKA ROUND #3 Friday, December 2nd
Shop opens at Noon.
Sign ups close at 6pm.
Racing begins at 7pm.
A slight track change has been made.
See you then!
#36
PRCR TRACK CLOSED FOR PRACTICE 12/01/11
Track will be closed by 6:00pm for repair and maintenance.
Thanks
Jim
Thanks
Jim
#37
Friday night Rockstar Rd 3 HOURS
ATTENTION ALL
On behalf of PRCR...I'm here to announce that the doors will open at 4pm so the track can cure from the track maintenance.
Thank you and see you there!!
On behalf of PRCR...I'm here to announce that the doors will open at 4pm so the track can cure from the track maintenance.
Thank you and see you there!!
#38
PRCR ROCKSTAR SERIES RACE RESULTS
Round #3
#39
Tech Initiate
Rule question
I would like to race in the novice class with my Slash. I have installed the LCG kit with the Rustler parts, will I be allowed to run in the novice class with this truck?
#41
PRCR 2011 Rockstar SCT Rnd 3 videos are up
Hey Guys, Great racing Friday.
Check out your race here:
http://www.youtube.com/user/gebventures?feature=watch
Ty
Check out your race here:
http://www.youtube.com/user/gebventures?feature=watch
Ty
#42
Tech Initiate
Points
Have the points been posted anywhere for the Rockstar Series?
#43