Pro Trak
#466
Originally Posted by rinkrat99
Hi Chris
I figured out the Excel thing! The file only stored a few parameters; Vpack, Vcells, Time and FallBack
Is there anything else that is needed?
I figured out the Excel thing! The file only stored a few parameters; Vpack, Vcells, Time and FallBack
Is there anything else that is needed?
Hi, yes it seems like you are missing a lot of info, you should get the volts for each cell, fallback for each cell, basically everything. Send me the .ptm file and I'll check it out.
[email protected]
#467
Originally Posted by crimson eagle
Wow I'm out of date. Where did you get that?
#468
Everyone keeps saying that Phil has the new version but is it posted somewhere? Can someone email it to me?
Thanks
Thanks
#469
#470
Its version 1.5.5.
#471
Tech Elite
iTrader: (40)
Loan a charger to Rinkrat99 and look what an EE is digging into!!!
Crimson Eagle, He has my new 30 amp unit you got to me this fall. Unit has worked great, and charging has keep me on the battery power with the 3700's. I'm off to run 1/8 gas this summer, so loaned the charger - thanks for all the help.
Come fall, it'll be ready for some new cells, so I hope you get a chance to play with the 4300's
Crimson Eagle, He has my new 30 amp unit you got to me this fall. Unit has worked great, and charging has keep me on the battery power with the 3700's. I'm off to run 1/8 gas this summer, so loaned the charger - thanks for all the help.
Come fall, it'll be ready for some new cells, so I hope you get a chance to play with the 4300's
#472
Look who wrote an response back!
Now Grenade when Chris gets me the right software there is no stopping me from gathering data!
Chris if you want to try some HOT motors, try the Integy Matrix 19t (Atlas based) and the KOS27 Stock!
Rinkrat
Now Grenade when Chris gets me the right software there is no stopping me from gathering data!
Chris if you want to try some HOT motors, try the Integy Matrix 19t (Atlas based) and the KOS27 Stock!
Rinkrat
#473
Originally Posted by rinkrat99
Look who wrote an response back!
Now Grenade when Chris gets me the right software there is no stopping me from gathering data!
Chris if you want to try some HOT motors, try the Integy Matrix 19t (Atlas based) and the KOS27 Stock!
Rinkrat
Now Grenade when Chris gets me the right software there is no stopping me from gathering data!
Chris if you want to try some HOT motors, try the Integy Matrix 19t (Atlas based) and the KOS27 Stock!
Rinkrat
Anyone coming to the Nats?
Chris
#474
Hey Chris
If you are running the same level of software, that does not explain why I am not getting the full data set.
Any suggestions?
If you are running the same level of software, that does not explain why I am not getting the full data set.
Any suggestions?
#475
I have a bare bones old laptop I use for my testing which I think is the latest version. I just don;t have the actual install program for the latest version. I had it on a usb flash drive but that died on me a month or two ago.
Chris
Chris
#476
1.5.6 is almost the same as 1.5.5. One difference is that 1.5.6 has the function to avoid the error by TIMEZONE. However, this does not affect the user of the United States or Japan.
runtime error may be generated when your PC runs short of DLLs. Please download runtime from microsoft, supposing you encounter runtime error.
http://www.microsoft.com/downloads/d...DisplayLang=en
Thank you,
Kimihiko.
runtime error may be generated when your PC runs short of DLLs. Please download runtime from microsoft, supposing you encounter runtime error.
http://www.microsoft.com/downloads/d...DisplayLang=en
Thank you,
Kimihiko.
#477
Tech Fanatic
iTrader: (19)
Ok Chris, I have a slight problem here. Saturday at the race track I went to slide my charger over (touched the side of the case) and got zapped by it (no wires were crossed or anything shorted out externally as far as I could see). I looked at the screen on the Protrak and all I seen were vertical lines on the screen (see picture). I then checked my other charger that was hooke up to it to see if that got messed up, but it wasn't. What can I do or check to correct this problem? Any help would be appreciated. I called and left a message on your machine. Thanks!
Last edited by 429racer; 11-07-2011 at 02:17 PM.
#478
Originally Posted by 429racer
Ok Chris, I have a slight problem here. Saturday at the race track I went to slide my charger over (touched the side of the case) and got zapped by it (no wires were crossed or anything shorted out externally as far as I could see). I looked at the screen on the Protrak and all I seen were vertical lines on the screen (see picture). I then checked my other charger that was hooke up to it to see if that got messed up, but it wasn't. What can I do or check to correct this problem? Any help would be appreciated. I called and left a message on your machine. Thanks!
Thanks for the pic, as we discussed on the phone I'm working on it and I'll let you know as soon as i find anything out.
Chris
#480
Originally Posted by 429racer
Excellent Chris! As always it is a pleasure to talk to you.