Yokomo MR-4TC SD
#4981
Tech Elite
iTrader: (2)
jjmudd you can try yokomo usa some time this week. I'm sure
they will have Chris Tosolini's set up as soon as he gets back
from cleveland. He is also answering questions there if you have
any for him. I also heard alot of people taking of thier center brace
But it was for Asphalt aplication I don't know how it will work for
carpet. i'm guessing keeping it for carpet would be the way to
go.
they will have Chris Tosolini's set up as soon as he gets back
from cleveland. He is also answering questions there if you have
any for him. I also heard alot of people taking of thier center brace
But it was for Asphalt aplication I don't know how it will work for
carpet. i'm guessing keeping it for carpet would be the way to
go.
#4982
Tech Champion
iTrader: (9)
Re: SUZUKI KNUCLES
Originally posted by OHBRAD
Hi again,. no stock at speedtech, no stock at speedway hobbies, and one have any ideas, some are saying could be months away for new stock
regards brad p
Hi again,. no stock at speedtech, no stock at speedway hobbies, and one have any ideas, some are saying could be months away for new stock
regards brad p
but may be too costly to ship to Austrialia for a $25.00 part.
#4984
Tech Champion
iTrader: (9)
Originally posted by Randman
The guy I use does mostly local stuff, I just hand him the bodies at the track. I'll ask him if he's interested in doing bodies from outside the area.
The guy I use does mostly local stuff, I just hand him the bodies at the track. I'll ask him if he's interested in doing bodies from outside the area.
#4985
Tech Master
iTrader: (1)
Re: Re: SUZUKI KNUCLES
Originally posted by rc-zombies
I might have one to sell...
but may be too costly to ship to Austrialia for a $25.00 part.
I might have one to sell...
but may be too costly to ship to Austrialia for a $25.00 part.
www.speedworldraceway.com
#4986
Tech Master
iTrader: (7)
Originally posted by jjmudd
Still hope one of you folks will share a good baseline set-up with me.
Still hope one of you folks will share a good baseline set-up with me.
#4987
Originally posted by jjmudd
I just picked up an SSG-SD and would appreciate some advice on set-up for the car. We are running mod 10 turn limit ,indoors on a 93' X 48' CRC Ozite carpet with foams. Typically plaid fronts and purple rears but a few of the guys at our track are doing well with a Speed Mind 45 front - 40 rear combination. Anyone have a good set-up that they would be willing to share with me??!! Yokomo USA site is ????? Also I was told that a lot of the faster racers are removing the bottom brace on the lower deck and just running the pan with the upperdeck...any truth to this rummor?
John
I just picked up an SSG-SD and would appreciate some advice on set-up for the car. We are running mod 10 turn limit ,indoors on a 93' X 48' CRC Ozite carpet with foams. Typically plaid fronts and purple rears but a few of the guys at our track are doing well with a Speed Mind 45 front - 40 rear combination. Anyone have a good set-up that they would be willing to share with me??!! Yokomo USA site is ????? Also I was told that a lot of the faster racers are removing the bottom brace on the lower deck and just running the pan with the upperdeck...any truth to this rummor?
John
*Use two top decks: this stiffens the chassis
*No stiffener: It just adds weight, doesn't stiffen the chassis side to side, only front to back
*Soft suspension: 3 hole pistons, 50 wt oil, 20 lbs springs all around (Associated Gold, Xray Light Blue, or Rayspeed Gray)
*Anti squat: 1.5 mm in rear
*Layed down shock positions: this helps keep the car from traction rolling
*Wheelbase: Shift all of the weight forward, arms all the way back (all around)
*Gold front sway bar, silver rear (both in lower position)
*Lower front arm hinge pin position w/ knuckle spacer on top
*Traction additive: something mild like TQ Orange, the chassis already creates a lot of traction
These are some starters, maybe I can post my setup sheet later, except it is for the Rayspeed Chassis
#4991
Tech Elite
iTrader: (5)
Originally posted by rc-zombies
let me know how much he charges... I've got a handful of bodies to be painted... I like yours... but in Orange..
let me know how much he charges... I've got a handful of bodies to be painted... I like yours... but in Orange..
Thanks Mo and jfw-frani...gives me a place to start!! I run Losi here but just traded a guy a Limited Edition Print for a new Losi and then traded a guy the Losi for the SSG-SD (I've got all the Losi stuff I need to keep me going for a long time but the SSG is just too sharp a car not to have. lol!! Also fun to try something different once in a while!
#4992
Carpet/foam racers. Tosolini had an awesome car at the Champs....... I will try to get him on here to post a set up. Car was just soooooooo dialed.....
#4993
Randman, that's very nice color !! I like it ! is that body painted by Robert?? looks like his job.
anyways,,,I have a question for you Randman, I just bought sway bars which are upper type just like Masami uses.
I tried to put them on my RS chassis, but it seems like impossible to put them since front shocks obstructed.
so,Randman,is your chassis all RS?? even shock mount tower? if so, How did you put them on it?? could you please tell me how to put the upper sway bar on RS chassis?
THANKS !!
anyways,,,I have a question for you Randman, I just bought sway bars which are upper type just like Masami uses.
I tried to put them on my RS chassis, but it seems like impossible to put them since front shocks obstructed.
so,Randman,is your chassis all RS?? even shock mount tower? if so, How did you put them on it?? could you please tell me how to put the upper sway bar on RS chassis?
THANKS !!
#4994
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Randman when do you get to run that Yoke? I'm interested to see how you like it vs. the first one you had.
#4995
Tech Regular
Anyone heard how much they might be selling the CGM for in the states or when?
BTW, if I understand right, the chassis is made of the same stuff that the XXX-S G+ chassis is.
BTW, if I understand right, the chassis is made of the same stuff that the XXX-S G+ chassis is.