sahcamaro

iTrader: (26)

I no this no doubt a stupid question but little confused with this receiver i have a spektrum sr3300t and i am not sure where to plug the amb transponder in at there is now where to plug it in accept on top level with rpm and temp says lap but i thought that was for the control counter? So like i said it sounds stupid to me but just not sure so i fiqured i asked

bacchus

iTrader: (8)

aux

sahcamaro

iTrader: (26)

Thought that's where battery plugged in at

Jizmac

You can power your receiver through any port that isn't a telemetry port. The telemetry ports are 3,3V. So you have 4 ports. Bind, throttle, steering and aux.

Frank L

iTrader: (148)

What about on a receiver that only has 3 slots. Do I "y" the battery slot?

adrictan

iTrader: (10)

If thre's only 3 slots, 1 for throttle, 1 for steering, 1 for transponder and if required, a y harness can be used on either the Aux or Batt.

Roelof

sahcamaro

iTrader: (26)

So u can use blind port to hook battery to then

Rampokker

iTrader: (9)

Yes you can hook up the battery to the bind port.

MikeFriery

iTrader: (19)

you are going to want to hook the battery to the aux, and the transponder to the bind, in case you ever have to rebind your radio in a pinch. That way, you are unplugging the transponder to do it, and not the battery.