Team Associated TC4
Tech Fanatic
Hello fellow tc4 owners.
I have some questions regarding the tc3 and tc4. A friend of mine gave me his old tc3 so I rebuilt it, cleaned up everything, new bearings and new electronics were dropped in. most likely this will be my vta car. So as I been looking to get some parts and spares I was looking for suggestions.
I bought a set of tc4 arms locally thinking they fit but the hinges fit loose. If I get the tc4 arms, hinges and the tc4 ft allow hinge/arm holder fit?
What are the major difference between them two and will my tc6 axles and dog bones bolt up if I want to swap to them? Was thinking about ordering a set instead of the allow ones and use regular 4mm hexes and wheel nuts.
I posted the above under tc3 as well. Thanks
I have some questions regarding the tc3 and tc4. A friend of mine gave me his old tc3 so I rebuilt it, cleaned up everything, new bearings and new electronics were dropped in. most likely this will be my vta car. So as I been looking to get some parts and spares I was looking for suggestions.
I bought a set of tc4 arms locally thinking they fit but the hinges fit loose. If I get the tc4 arms, hinges and the tc4 ft allow hinge/arm holder fit?
What are the major difference between them two and will my tc6 axles and dog bones bolt up if I want to swap to them? Was thinking about ordering a set instead of the allow ones and use regular 4mm hexes and wheel nuts.
I posted the above under tc3 as well. Thanks
TC6 axles will not fit the TC3 or 4. But the NTC3 axles will fit and are a great upgrade
Tech Regular
iTrader: (14)
Does anyone know where I could find a 48p spur gear 64t? I want to run close to a 4.00fdr
And a 64t spur gear with a 40t pinion gear would get me right at 4.00fdr.
And a 64t spur gear with a 40t pinion gear would get me right at 4.00fdr.
Nobody makes a 64t 48p spur gear... 60t spur gear is the right choice...
Tech Rookie
Hey guys, does anyone still run the graphite ft tc4? I'm gonna be making new graphite shock towers and was wondering if anybody had used them before? If so, what improvements could be made to them for strength, handling, and tuneability if any?
The graphite shock towers are pretty good . I have not broken One yet.
Tech Regular
iTrader: (14)
Tech Regular
iTrader: (14)
nvm found it
Tech Adept
iTrader: (6)
Servo Recommendation
I just picked up a gently used TC4 roller. I plan on setting it up for VTA club racing. I am looking for some servo recommendations. Any suggestions would be appreciated.
Tech Champion
iTrader: (2)
Brian S. and I went to Summit RC Raceway in Fort Wayne, Indiana last night for their Winterfest VTA Race. It was awesome! 4 heats of VTA cars! Anyway, I just wanted to post that Brian took 1st place with his trusty old TC4. Proving once again that the TC4 is an excellent VTA platform!
I run a TC3, and have parts for them. But, if I was starting from scratch, I'd choose a TC4 especially since its been re-released and parts are easy to get.
I run a TC3, and have parts for them. But, if I was starting from scratch, I'd choose a TC4 especially since its been re-released and parts are easy to get.
The tc4 rules baby !!! Congrats Brian!!!
Nice job Brian!
I'm looking for a new motor for 17.5 tc what would be better to go with?
A RevTech or D3.5 Maxzilla?
I'm looking for a new motor for 17.5 tc what would be better to go with?
A RevTech or D3.5 Maxzilla?
Tech Regular
iTrader: (18)
New TC4 Team Edition for VTA
Here is my new TC4 chassis (thanks Eric) ready for VTA at the Rumble next weekend. DP
Tech Champion
iTrader: (2)
Brian S. and I went to Summit RC Raceway in Fort Wayne, Indiana last night for their Winterfest VTA Race. It was awesome! 4 heats of VTA cars! Anyway, I just wanted to post that Brian took 1st place with his trusty old TC4. Proving once again that the TC4 is an excellent VTA platform!
I run a TC3, and have parts for them. But, if I was starting from scratch, I'd choose a TC4 especially since its been re-released and parts are easy to get.
I run a TC3, and have parts for them. But, if I was starting from scratch, I'd choose a TC4 especially since its been re-released and parts are easy to get.