Marcos.J

iTrader: (239)

Hey Tim your car looked great out there today!! It should just get faster tomorow!

yyhayyim

iTrader: (26)

OK. The best thing would be to check what other fast guys are running at your tracks and go from there.

yyhayyim

iTrader: (26)

You mean MuchMore faster tomorrow? J/k Tim...good luck tomorrow and keep it up.

Anyone running one ways?

Randy Caster

iTrader: (47)

Tim or Butter, either of you guys going to the nats?

Pit spots are $10 each, just wondering whos gonna be there from Serpent so we can reserve a block of pit spots together, just give me a heads up and I'll reserve them.

TimPotter

iTrader: (15)

Yohan,

Nobody that I know is running 1 way.

Randy, I will not know if I can go... until last minute... I believe Butter is going though...

I just got back from our state race at Kraceway.... While my driving,nor traffic was good to me, well, we made some great progress with the setup for this type of track. Butter was along to wrench on cars, so we worked on a bunch of differnt things.

Kinda beat right now, but will update on the thing we tried...

Randy Caster

iTrader: (47)

Ok, well for now I'm just going to reserve my spot, if you guys end up going just ask him if we can get grouped together...

yyhayyim

iTrader: (26)

Did Jon build his S400 yet? Silly question...he took like 4 days to build his MI3, as he's very meticulous...just hoping to hear when he'll be testing it and what his thoughts are on the car

Randy Caster

iTrader: (47)

He got it yesterday and came by my place so I could look it over, it was maybe 60% done but I talked to him earlier and it sounds like it's all finished now.

Jon Kerr

iTrader: (17)

Roller is done. Waiting on a speedo to do the wiring. The build went quite well. Had to message a few plastic parts to get clearance putting Randy's setup on though. I'll take a couple pics when I get everything together. I'm not running Reedy and probably won't get to race next weekend so I'm not in a huge hurry.

Xtreme2008

iTrader: (1)

Nice...cant wait to hear how you like it. You have a gear diff on it now?

Jon Kerr

iTrader: (17)

No I can't find one. I really want to run it too. If anyone has one they want to sell, I'll take it off their hands.

Randy Caster

iTrader: (47)

And I'll borrow it for the week of the nats!

TeamButter

iTrader: (3)

I have one if you need it. Let's see..it's worth about 35 Euros, so thats roughly $1,268.13 USD.

Let me know your shipping address Jon!

Jon Kerr

iTrader: (17)

What sucks is that's not far off.

YGPM

pc9840

iTrader: (2)

is anyone ordering bulk wheel bearings? I am having the hardest time finding anyone to get them from in bulk. All the bearing places that I know of only have 5X10X4 or if they have 5X10X3 then its an open bearing. Anyone have any ideas?