MikaR

http://www.venom-group.com/Store/1-8...heels-Blk-2Pcs

WildBillMassey

iTrader: (5)

After many months on back-order, Kyosho America finally received GT2 bodies. After filling all of our back-orders here at IGT Hobbies, we have the following left...

Corvette Clear
Corvette Completed
McLaren Clear

We also got more 350Z bodies in for GT1.

These will go unbelievably quick, so if you want one, you better get to gettin'

WWW.IGTHOBBIES.COM

Jspeed

Cool new track video!

+ YouTube Video

Herrsavage

That IS a massively cool track...

bobbyblaze

iTrader: (1)

i like how technical the curves then 2 haul ass straights nice track

rc_cal

hi everyone, im new to gt and also new to onroad...previously im only with offroad buggy....just bought an inferno gt....my local track here is a little small,alot of tight corners...any body can give some tricks and tip about what option to make the car run better,how to setup the diff, the shock and so on....

bassman2

iTrader: (7)

The setup below will make your car competitive on the track:

Replace stock tranny with this one:

http://www.igthobbies.com/KYOSHO-KYO...SET_p_437.html

Replace stock break discs and pads with these:

http://www.igthobbies.com/KYOSHO-KYO...ADS_p_347.html

http://www.igthobbies.com/KYOSHO-KYO...SK_p_1646.html

Tire: Sweep/Ipanema/GRP/PMT/Ofna/Kyosho/GQ.....

Shock oil: 80wt in the front, 85 in the rear

spring: black all around

Ride Height: 9mm in the front and 10mm in the rear

Camber: -1.5 degrees in the front and -2 degrees in the rear

Diff oil: 40000 in the front and 20000 in the rear

Steering plate at "C" position

Roll Bar: 2.8mm in the front and 2.6mm in the rear

Shock Mount position:

Front: Top/IN
Rear: Top/OUT

Toe angle:

Front: 0 degree
Rear: 3 degrees toe-in


Good luck and have a blast with this awesome car that we all love !!!!

Tabushi

iTrader: (1)

BASSMAN2, do you know if those Kyosho brake discs fit on OFNA DM ?

thanks !

CurveTracer

iTrader: (5)

PATO,
the DM1/Spec brake mounting pad mounting holes are further apart than Kyosho mounting holes. I elongated the oval shaped hole (on both brake pads) with my dremel tool.

rc_cal

thanks alot...

bassman2

iTrader: (7)

I do know Ofna offers very similar type of brake pads, I just can't remember the part number now.......Call Hobby Habit at Orem, Utah they should be able to help you, ask for Gus. I am very sorry that I am not able to help you further.

bassman2

iTrader: (7)

No problem at all!!!

romuald31

Hello from France,

I'm looking for some info about the Serpent 811 Cobra GT.

Thx.

Romuald.

jneg

The Cobra GT is still in pre-production, they (Serpent) is working out some details but they say it is very close to production. There are a lot of racers looking foward to this release.

WildBillMassey

iTrader: (5)

OFNA offers the same type of pads/disk for their cars.....

http://www.igthobbies.com/OFNA-OFN49...SK_p_1016.html

http://www.igthobbies.com/OFNA-OFN36...PAD_p_886.html