GT class--buggy-based on road!
#7427
After many months on back-order, Kyosho America finally received GT2 bodies. After filling all of our back-orders here at IGT Hobbies, we have the following left...
Corvette Clear
Corvette Completed
McLaren Clear
We also got more 350Z bodies in for GT1.
These will go unbelievably quick, so if you want one, you better get to gettin'
WWW.IGTHOBBIES.COM
Corvette Clear
Corvette Completed
McLaren Clear
We also got more 350Z bodies in for GT1.
These will go unbelievably quick, so if you want one, you better get to gettin'
WWW.IGTHOBBIES.COM
#7428
#7429
Tech Champion
That IS a massively cool track...
#7431
Tech Adept
new to gt
hi everyone, im new to gt and also new to onroad...previously im only with offroad buggy....just bought an inferno gt....my local track here is a little small,alot of tight corners...any body can give some tricks and tip about what option to make the car run better,how to setup the diff, the shock and so on....
#7432
Tech Addict
iTrader: (7)
hi everyone, im new to gt and also new to onroad...previously im only with offroad buggy....just bought an inferno gt....my local track here is a little small,alot of tight corners...any body can give some tricks and tip about what option to make the car run better,how to setup the diff, the shock and so on....
The setup below will make your car competitive on the track:
Replace stock tranny with this one:
http://www.igthobbies.com/KYOSHO-KYO...SET_p_437.html
Replace stock break discs and pads with these:
http://www.igthobbies.com/KYOSHO-KYO...ADS_p_347.html
http://www.igthobbies.com/KYOSHO-KYO...SK_p_1646.html
Tire: Sweep/Ipanema/GRP/PMT/Ofna/Kyosho/GQ.....
Shock oil: 80wt in the front, 85 in the rear
spring: black all around
Ride Height: 9mm in the front and 10mm in the rear
Camber: -1.5 degrees in the front and -2 degrees in the rear
Diff oil: 40000 in the front and 20000 in the rear
Steering plate at "C" position
Roll Bar: 2.8mm in the front and 2.6mm in the rear
Shock Mount position:
Front: Top/IN
Rear: Top/OUT
Toe angle:
Front: 0 degree
Rear: 3 degrees toe-in
Good luck and have a blast with this awesome car that we all love !!!!
#7435
Tech Adept
The setup below will make your car competitive on the track:
Replace stock tranny with this one:
http://www.igthobbies.com/KYOSHO-KYO...SET_p_437.html
Replace stock break discs and pads with these:
http://www.igthobbies.com/KYOSHO-KYO...ADS_p_347.html
http://www.igthobbies.com/KYOSHO-KYO...SK_p_1646.html
Tire: Sweep/Ipanema/GRP/PMT/Ofna/Kyosho/GQ.....
Shock oil: 80wt in the front, 85 in the rear
spring: black all around
Ride Height: 9mm in the front and 10mm in the rear
Camber: -1.5 degrees in the front and -2 degrees in the rear
Diff oil: 40000 in the front and 20000 in the rear
Steering plate at "C" position
Roll Bar: 2.8mm in the front and 2.6mm in the rear
Shock Mount position:
Front: Top/IN
Rear: Top/OUT
Toe angle:
Front: 0 degree
Rear: 3 degrees toe-in
Good luck and have a blast with this awesome car that we all love !!!!
Replace stock tranny with this one:
http://www.igthobbies.com/KYOSHO-KYO...SET_p_437.html
Replace stock break discs and pads with these:
http://www.igthobbies.com/KYOSHO-KYO...ADS_p_347.html
http://www.igthobbies.com/KYOSHO-KYO...SK_p_1646.html
Tire: Sweep/Ipanema/GRP/PMT/Ofna/Kyosho/GQ.....
Shock oil: 80wt in the front, 85 in the rear
spring: black all around
Ride Height: 9mm in the front and 10mm in the rear
Camber: -1.5 degrees in the front and -2 degrees in the rear
Diff oil: 40000 in the front and 20000 in the rear
Steering plate at "C" position
Roll Bar: 2.8mm in the front and 2.6mm in the rear
Shock Mount position:
Front: Top/IN
Rear: Top/OUT
Toe angle:
Front: 0 degree
Rear: 3 degrees toe-in
Good luck and have a blast with this awesome car that we all love !!!!
#7438
Tech Addict
Hello from France,
I'm looking for some info about the Serpent 811 Cobra GT.
Thx.
Romuald.
I'm looking for some info about the Serpent 811 Cobra GT.
Thx.
Romuald.
#7439
Tech Addict
The Cobra GT is still in pre-production, they (Serpent) is working out some details but they say it is very close to production. There are a lot of racers looking foward to this release.
#7440
http://www.igthobbies.com/OFNA-OFN49...SK_p_1016.html
http://www.igthobbies.com/OFNA-OFN36...PAD_p_886.html