Destiny RX-10S
#76
random...but those the gear diff is interchangeable both front and rear right? it's not a different part number?
http://www.destinyracing.jp/index.ph...product_id=104
http://www.destinyracing.jp/index.ph...product_id=104
#77
Yes - the diffs are internchangeable front and rear.
#78
cool thanks
#79
is there any brands that have interchangeable bladders with this chassis' shocks? i really dont want to drill a hole in the caps just to get rebound when i was able to do that with my TC7 shocks with a simple bladder swap
#81
#82
#83
phatboislim, what are you trying to accomplish? Full rebound, partial, or none? I only race on carpet and typically build my shocks with little to no rebound. I have been able to accomplish with the kit bladders. It took some time, but was able to do it. Building them with rebound I found very easy.
#84
i'm trying to get zero to little rebound, but when i go to try to set it as such the shaft always extends out once i get the cap closed. i'd like to see the method (youtube/some kind of video) yall do in order to get zero/little rebound with the kit bladders because i couldnt get it. i sat on my couch working at my table trying time and again with no ability to get them built as such.
i race on the new black crc carpet
i race on the new black crc carpet
#85
just drill the cap
#86
Drilling the cap does work, but you need to keep the shaft moved in while screwing on the cap extremely slow. Alexander Hagberg has a youtube video on building Xray shocks with zero rebound and they are basically the same thing. I will see if I can find it.
#87
I'll look for the video too thanks for a direction to at least look
#88
if xray caps are the same then xray sell the option caps with the holes already in them which will get you 0 rebound, I have tried building without the hole in the cap and never got 0 rebound, good luck hope it works for you.
#89
Found alexander vid...followed it and reduced my rebound but not by much... from full rebound to maybe 30- 40%