Speedpassion Brushless.
#378
Tech Apprentice
Xraydad:
Are you running the older "holes in the silver motor car" design, or the newer solid annodized can design?
If it's the older can design, SP has "reved up" several versions of improvement since then. You may not be able to gear up to keep up w/the Novak/LRP with one of those before going temp critical.
We are only bringing in the solid anodized 10.5/13.5 motors, as they were the only ones directly comparable to the Novak/LRP designs.
Island:
Schumacher USA will have combos for those who want them. Pricing/part #'s should be released early next week. I've got everything in our system, now it's time to play marketing weasel to get all the info out there.
Are you running the older "holes in the silver motor car" design, or the newer solid annodized can design?
If it's the older can design, SP has "reved up" several versions of improvement since then. You may not be able to gear up to keep up w/the Novak/LRP with one of those before going temp critical.
We are only bringing in the solid anodized 10.5/13.5 motors, as they were the only ones directly comparable to the Novak/LRP designs.
Island:
Schumacher USA will have combos for those who want them. Pricing/part #'s should be released early next week. I've got everything in our system, now it's time to play marketing weasel to get all the info out there.
The simple answer is yes it is the holes in the can motor. What is the part number of the anodised 13.5 please?. As I only purchased this last week, I thought it was latest motor - oh well.....
#379
We'll be carrying the SPF135 and SPF105, which are the full annodized can 13.5 and 10.5 motors respectively.
#381
Tech Apprentice
Thanks
#382
Tech Champion
iTrader: (31)
You wouldn't have a part number for the upgraded rotor by any chance please? Do you know if the timing is adjustable, or more to the point do you know if the little notches in the timing ring should line up with the end plate screws where the sensor wire plugs in or not?. I ask this as I am almost certain that the motor has been dismantled prior to buying it as there are some strange marks on all the screws.
Thanks
Thanks