Brian McGreevy

iTrader: (10)

Now I have 2 ways to get Takeoffs for this summer...excellent

fjm9898

iTrader: (11)

i am having probems with my tc3 bmi chasis i just got. the battery keeps falling out during races if i so much as tap a wall. i have put foam on my battery bar and tighten down the battery bar screws before every race but it still manages to fallout. does anyone have any ideas that might help my problem?

protc3

iTrader: (13)

if you take a small flat file,file the radiused edges on the slots in each corner to drop the cells a little deeper.this will square the corner up on the cell slots.what is happening is the sides of the cells are hitting the corners of the slots and not allowing them to fully seat inside the slot.being that the edges are pre beveled,this will only take a few minutes.if you have any problems with this i can do them for you buddy
also make sure you are using the aluminum battery strap or something a bit more rigid than the plastic one.hope this helps.one way or another we will get your batteries to stay in your car buddy

jag88

iTrader: (1)

Jason, I noticed on the TC4 chassis that you have holes for the TC4 str'g rack, the TC3 rack and the NTC3 rack. What effect does each one have on str'g ? My guess is that the TC3 rack is the most aggressive.
Thanks.

fjm9898

iTrader: (11)

thanks, ill give it a shot and let ya know how it works

acyrier

iTrader: (8)

I was having the same problem. I did 2 things... ordered the BMI strap..wider and doesn't seem to allow the cells to shift sideways and ordered the FT battery spacer. This doesn't allow the batts to slip forward. Was a little mroe money... but worth it. I havn't had the problem since.

fjm9898

iTrader: (11)

thanks again, ill to it all! i never want it to fall out during a main again like it did, and i was pissed but hey stuff happens

fjm9898

iTrader: (11)

wait, a BMI battery strap? i dont see one on their webpage

protc3

iTrader: (13)

jag88,

the tc4 rack location is changed from stock for more usable ackerman positions.the tc3 rack is for those who like that feel better,and the front ntc3 rack position is for a no ackerman setting.the tc4 rack and the tc3 rack are going to be the most adjustable.the tc4 rack is mostly maintenece free so most like that.

as for thew battery strap,i do offer a battery strap for the tc3.i have been slacking on website updates. i will get it updated very soon.if anyone has any questions,feel free to call the shop.

fjm9898

iTrader: (11)

well when you have the strap on the page can you drop a post here?

Korey Harbke

iTrader: (13)

Sweet!!!! Take off and Rp tires are dialed!

-Korey

blr

Is BMI going to make chassis for the X-Ray FK'05? If so, when and will it be made to accept 3700's?

protc3

iTrader: (13)

i will be releasing a kit for the fko5 sometime in may.and it will fit the 3700's

sg1

iTrader: (79)

Jason darling....
Check your e-mail at work in the morning!!! I just sent a CAD file over for you to look at

Wayne

Racer_Chick

My dad just got back from meeting Sean (N4S) to pick up my TC4 chassis and all I have to say is WOW! The chassis looks great! Another excellent job by Jason. I'm going to start on it tonight and have it ready for practice on saturday and racing on sunday and then bringing it to the superior state race the following weekend.

Jason - thanks! That's top notch work, that is