Barry_Hughes

Can anyone tell what rate oil is supplied with the Refine 2 KIt?

JoeyE

iTrader: (45)

2.187

swimbikerun

iTrader: (108)

Actually it's Tamiya Yellow which is #400 in metric or 40wt in SAE.

Barry_Hughes

Thought it might be as that is what is supplied with the previous kits.

Want to try the basic setup in the MSX manual.

Kingsbury

iTrader: (50)

Hi, I bought the diff for this car that yokomo makes for it. Put it together and everything and installed it and the driveshafts only touch the very end of the outdrives and it wont work properly. Do I need longer driveshafts or.....? Thanks
Brett

Barry_Hughes

if you have 42mm shafts they will need to be changed to the 46mm ones

JoeyE

iTrader: (45)

Hey peeps, I just bought a couple of these on ebay. Thought you might be interested if you need one or if you've seen it already, then good for you.

ebay item #6052686431

JoeyE

iTrader: (45)

This is cool too.

ebay item number: 6052661919

Charles Godwin

iTrader: (2)

Got my MSX R2 in the A final today (27turn) at Bedworth BTCC today....finally . Saw a few other tamiya cars but not that many.

Charles

Tsquare

iTrader: (4)

I've never seen this one, anybody out there use this one yet? I have had great luck with the spool from RCManix.

drew85

iTrader: (3)

Anyone have a good setup for the Tamiya track? I have heard that David juns KO race setup is good but what to see if anyone had one for just the msx and I am not running the dj rear end.

Thanks

Charles

I am selling my TRF415 in the RC for sale section, for $125.00 Nice car sweet price.

email [email protected]

Csaari77

iTrader: (35)

Does anyone know what the dimensions are for the bearings on the belt stabilizer on the msx? I ran mine for the first time yesterday, and the screw that holds the bearings backed out. I'm going to run the car in the TCS race in Memphis this weekend and need to get them replaced ASAP.

trf_racer

It's 630 size ball bearing.

Customworksking

iTrader: (74)

anyone going to Wi Trackside this weekend for the stock rubber race ? just put my 4mm chassis on and cant wait to see how it works