Mugen MTX-3
#3466
Originally posted by RClover
i thought it should be the two pins instead of this plastic ?
i thought it should be the two pins instead of this plastic ?
#3467
Originally posted by Manticore
the lastest kit comes with that plastic stoppers
the lastest kit comes with that plastic stoppers
#3468
Originally posted by RClover
ic...ic....how come you know and i dont know...
ic...ic....how come you know and i dont know...
#3469
Originally posted by Manticore
i want to know in number of T
i want to know in number of T
so i can use the RR Rear SP belt...yaahooo..
Last edited by RClover; 04-28-2003 at 09:26 PM.
#3470
tried fitting the RR SP side belt on my 3, they fit well within the pulley, the belt width is just right on the side pulleys...
and both 3 and RR side belts are of same lenght in terms of number of teeth.
and both 3 and RR side belts are of same lenght in terms of number of teeth.
#3471
Originally posted by RClover
i know the front is 32T, but not sure about the rear
i know the front is 32T, but not sure about the rear
#3472
Originally posted by InitialD
The front and rear diff pulley has the same number of teeth as the V1RR... 32T and 48T respectively.
The front and rear diff pulley has the same number of teeth as the V1RR... 32T and 48T respectively.
Does that mean RR belts work? If so, they are more readily available in my area.
#3473
Originally posted by RClover
tried fitting the RR SP side belt on my 3, they fit well within the pulley, the belt width is just right on the side pulleys...
and both 3 and RR side belts are of same lenght in terms of number of teeth.
tried fitting the RR SP side belt on my 3, they fit well within the pulley, the belt width is just right on the side pulleys...
and both 3 and RR side belts are of same lenght in terms of number of teeth.
#3474
Originally posted by puma1824
Does that mean RR belts work? If so, they are more readily available in my area.
Does that mean RR belts work? If so, they are more readily available in my area.
#3475
Originally posted by puma1824
Does that mean RR belts work? If so, they are more readily available in my area.
Does that mean RR belts work? If so, they are more readily available in my area.
#3476
Originally posted by RClover
will try fitting the rear SP belt tomolo....
will try fitting the rear SP belt tomolo....
#3477
Originally posted by Manticore
oh really? too bad, i am going to use shorter belt from now on !!
oh really? too bad, i am going to use shorter belt from now on !!
#3478
Originally posted by RClover
ran my car at on a low grip parking lot tight track, when rear tyres were wearing out half and the rear bottoms out, so i increased the spring tension using the shock adjuster to raise the rear ride height, but it spun when i exit the corners under hard acceleration...any idea how to fix this?
(rear diff wif 100K grease)
ran my car at on a low grip parking lot tight track, when rear tyres were wearing out half and the rear bottoms out, so i increased the spring tension using the shock adjuster to raise the rear ride height, but it spun when i exit the corners under hard acceleration...any idea how to fix this?
(rear diff wif 100K grease)
Return to the 10K oil on the diff to smoothen the bad manners of that guy coming out the turns. The difference on diameter of the tyres have too the responsibility of your handling problems. Change to a new set of softer foams (35sh for example).
#3479
Tech Apprentice
What would you guys say if I tell you that my LHS wants to sell me the MTX-3 for 800$??? Pretty funny . Maybe I won't be able to drive it after all.
#3480
Originally posted by Speed De
What would you guys say if I tell you that my LHS wants to sell me the MTX-3 for 800$??? Pretty funny . Maybe I won't be able to drive it after all.
What would you guys say if I tell you that my LHS wants to sell me the MTX-3 for 800$??? Pretty funny . Maybe I won't be able to drive it after all.
You have on Europe plenty of shops that carry it at a good price, Better on USA, better on HK....
Seems odd those disparity of prices around the world..