LC Racing EMB-1H Official Thread
#2057
Tech Master
iTrader: (1)
Has anyone found an easy solution to stopping the hub bearings from blowing out every run? I know of the spacer method, but a spacer the proper size is a unicorn and very hard to find. LC Racing EMB-1H Official Thread
#2058
Tech Legend
iTrader: (294)
Has anyone found an easy solution to stopping the hub bearings from blowing out every run? I know of the spacer method, but a spacer the proper size is a unicorn and very hard to find. LC Racing EMB-1H Official Thread
here is the original link.
http://thumbsdesigns.com/product/emb...sh-tubes-4pcs/
shot them a message to see if they will be willing to at least say some dimensions to stick to.
Based on what someone measured they sent me images of, it looks like its:
4x6x2mm
Last edited by Cain; 09-01-2019 at 03:51 PM.
#2060
The B6 wing mount has been posted here and in the FB groups by a couple people. It was next on my list of things to do to the LC12 but I just sold it last week. Never thought I would, but going into a different area of the hobby and it wasn't getting ran much.
#2061
Tech Elite
iTrader: (85)
As far as the LC12 I have had a few practice days on the carpet and it is slowly getting dialed in. But the push back against the buggy has been weird. The track only runs 17.5 2wd and 13.5 4wd, so a mini class wouldn't really hamper anything. But most people just say I wasted my money and should have gotten a 10th scale. Shame is my lap time are comparable or faster than most with the LC12. It is a capable car and can't wait to get more minis out there
#2065
It looks like they put a 550 motor in it. So maybe a 540 brushless motor should fit! Barely any room for electronics but damn thats cheap.
My brother has a WLtoys rock racer and its surprisingly good for what it is. If the do a knock off long wheel base car i might have to bite.
#2066
Tech Master
iTrader: (1)
Crazy to see a knock off of a car that is over 7 years old. But then again its crazy to see a 7 year old car still being sold and supported.
It looks like they put a 550 motor in it. So maybe a 540 brushless motor should fit! Barely any room for electronics but damn thats cheap.
My brother has a WLtoys rock racer and its surprisingly good for what it is. If the do a knock off long wheel base car i might have to bite.
It looks like they put a 550 motor in it. So maybe a 540 brushless motor should fit! Barely any room for electronics but damn thats cheap.
My brother has a WLtoys rock racer and its surprisingly good for what it is. If the do a knock off long wheel base car i might have to bite.
#2067
Tech Adept
Is that... Even a knock off??? Looks like it just is the LMB-1. What am I missing besides the 540? Where do you draw the line!?!? Knock offs are getting intense.
#2068
Tech Master
iTrader: (1)
Hell we could even argue that it is a clone instead of a knock off.
Either way it is not made by LC Racing they have confirmed this on Facebook.