The Speed Passion Thread
#8207
F1 17.5 MMM with GT 2.1
Hi guys, i'm running in F1 17.5T class and i need some tips.
I'm running with slick tires on asphalt
At the moment i have GT 2.1 pro stock edition ESC and 17.5 MMM motor, the motor is really powa maybe to much and probably the esc is with touring mod class program...
I'm getting my LCD Professional program card this week and i would like to know what kind of setting, firmware and program i have to use.
Please Help ME i have googled a bit but i haven't find nothing for gt 2.1 on f1 cars
I'm running with slick tires on asphalt
At the moment i have GT 2.1 pro stock edition ESC and 17.5 MMM motor, the motor is really powa maybe to much and probably the esc is with touring mod class program...
I'm getting my LCD Professional program card this week and i would like to know what kind of setting, firmware and program i have to use.
Please Help ME i have googled a bit but i haven't find nothing for gt 2.1 on f1 cars
#8209
Tech Champion
iTrader: (17)
Hi guys, i'm running in F1 17.5T class and i need some tips.
I'm running with slick tires on asphalt
At the moment i have GT 2.1 pro stock edition ESC and 17.5 MMM motor, the motor is really powa maybe to much and probably the esc is with touring mod class program...
I'm getting my LCD Professional program card this week and i would like to know what kind of setting, firmware and program i have to use.
Please Help ME i have googled a bit but i haven't find nothing for gt 2.1 on f1 cars
I'm running with slick tires on asphalt
At the moment i have GT 2.1 pro stock edition ESC and 17.5 MMM motor, the motor is really powa maybe to much and probably the esc is with touring mod class program...
I'm getting my LCD Professional program card this week and i would like to know what kind of setting, firmware and program i have to use.
Please Help ME i have googled a bit but i haven't find nothing for gt 2.1 on f1 cars
I would use the 508_no_timing software and concentrate on the F1 car setup instead. I was gear at 23/96 on my F103 running V2 Ultrasportsman 21.5 motor with Cirtix Club Spec ESC since day 1.
#8211
There is not much you need to do on F1...and I personally think 17.5 is too much. We ran 21.5/silver can and it is plenty fast. Also, no timing on ESC. I set the timing on the motor to the middle position and it is more then enough.
I would use the 508_no_timing software and concentrate on the F1 car setup instead. I was gear at 23/96 on my F103 running V2 Ultrasportsman 21.5 motor with Cirtix Club Spec ESC since day 1.
I would use the 508_no_timing software and concentrate on the F1 car setup instead. I was gear at 23/96 on my F103 running V2 Ultrasportsman 21.5 motor with Cirtix Club Spec ESC since day 1.
Do you use some kind of drag brake?
I was using 25/96 i'll try something less
#8212
Tech Champion
iTrader: (17)
#8214
Tech Addict
iTrader: (29)
Busted esc
It breaks my heart to say but, I think my cirtix stock club esc is toast.
I ran one heat of vta then nothing my servo works but no motor I've tried a differnt motor, rebinding/calibrating esc and nothing just blinks red what would cost to get this fixed or should I just buy another one.
I ran one heat of vta then nothing my servo works but no motor I've tried a differnt motor, rebinding/calibrating esc and nothing just blinks red what would cost to get this fixed or should I just buy another one.
#8216
Hello,
My gt2.0 pro is box stock, do i have to change the firmware or does it have the 205g mod ???
Am looking to get a new 4.0 motor, shall i get the v3 or get the 4.5 mmm??
Is the 4.0 mmm available or not yet??
Whats a good fdr for an asphalt track with long straights?? Car is T3!
Cheers
Ali
My gt2.0 pro is box stock, do i have to change the firmware or does it have the 205g mod ???
Am looking to get a new 4.0 motor, shall i get the v3 or get the 4.5 mmm??
Is the 4.0 mmm available or not yet??
Whats a good fdr for an asphalt track with long straights?? Car is T3!
Cheers
Ali
#8217
Tech Champion
iTrader: (17)
It breaks my heart to say but, I think my cirtix stock club esc is toast.
I ran one heat of vta then nothing my servo works but no motor I've tried a differnt motor, rebinding/calibrating esc and nothing just blinks red what would cost to get this fixed or should I just buy another one.
I ran one heat of vta then nothing my servo works but no motor I've tried a differnt motor, rebinding/calibrating esc and nothing just blinks red what would cost to get this fixed or should I just buy another one.
It is instock for a short period of time...get it before it is out of stock again.
http://www.speedpassion.net/us/produ...?p=12280&c=ESC
#8218
Tech Champion
iTrader: (17)
Hello,
My gt2.0 pro is box stock, do i have to change the firmware or does it have the 205g mod ???
Am looking to get a new 4.0 motor, shall i get the v3 or get the 4.5 mmm??
Is the 4.0 mmm available or not yet??
Whats a good fdr for an asphalt track with long straights?? Car is T3!
Cheers
Ali
My gt2.0 pro is box stock, do i have to change the firmware or does it have the 205g mod ???
Am looking to get a new 4.0 motor, shall i get the v3 or get the 4.5 mmm??
Is the 4.0 mmm available or not yet??
Whats a good fdr for an asphalt track with long straights?? Car is T3!
Cheers
Ali
http://www.speedpassion.net/uploadfi...open%20mod.pdf
#8219
My Citrix doesnt work in 1S
#8220
Tech Fanatic
i have a question im about to send my esc in to have a case replace on it and i dont have warranty card i have the r.a number how long it tke to turn around to put another bottom case on the gt pro2.0 thxs reggie