KO PROPO EX-10 Helios q's
#196
Thank you Theisgroup & KO staff!
I'll try to recalibrate the potmeter this weekend.
I'll try to recalibrate the potmeter this weekend.
#197
Re: Batteries
Originally posted by Hebiki
here are the ones i use:
Charger:
http://www.bestbuy.com/site/olspage....0&type=product
Batteries (1850mah NIMH)
http://www.bestbuy.com/site/olspage....0&type=product
i have a ton of these at the house, i use them for remote controls, my rc radios, wall clocks and my digital camera. great batteries too bad they're not matched! HAHAHAHAH
here are the ones i use:
Charger:
http://www.bestbuy.com/site/olspage....0&type=product
Batteries (1850mah NIMH)
http://www.bestbuy.com/site/olspage....0&type=product
i have a ton of these at the house, i use them for remote controls, my rc radios, wall clocks and my digital camera. great batteries too bad they're not matched! HAHAHAHAH
#198
Re: Re: Batteries
Originally posted by =MisFitz= NuKe
1850mah, lol, I have some 2300, 2400 are on the way...
1850mah, lol, I have some 2300, 2400 are on the way...
#199
Re: Re: Re: Batteries
Originally posted by P2
Not all of us are spoiled like U
Not all of us are spoiled like U
#200
Tech Master
Steering wheel
Mike, How did the spinner turn out? Got any pics?
#202
Re: Steering wheel
Originally posted by KO PROPO Staff
Mike, How did the spinner turn out? Got any pics?
Mike, How did the spinner turn out? Got any pics?
#203
Here you go guys...
As you can see the little piece in the center is all black, still need to grind it even more.
As you can see the little piece in the center is all black, still need to grind it even more.
#205
Yeah, I am still tweaking it, it still has too much slop in the spinner for me, just need to find my old clutch parts boxes from my nitro days, to find the right shims. And then I am going to grind on the little black piece more, and paint, or polish it. I also need to get with Robert about getting some internal wheel parts to really modify, and make it look even sweeter. Robert, Ill give you a call sometime this week about it.
#206
Tech Master
!Bling! You are going to blind someone on the driver's stand! Looks good Mike.
#208
Dom, man, that would take way too long. Just buy the Ko Wheel adaptor, then go buy
1 pair: the new Pro-Line Spinners
1 pair: Pro-Line Spinner wheels
1 3mmx20mm screw
Some CRC 5mm clutch shims (like 6mm O.D. and 5mm I.D.)
One package (two bearings) 12mmx8mm Bearings
" " " " 8mmx5mm Bearings
One of those Mugen Clutch-Holder-Together-Dealies (see picture, the black thing)
Take the bearings out of the stock spinner, then get the grease out of the new bearings, and oil them. Then, fit one 8x5mm bearing into one 12x8mm bearing, then do the same for the other two bearings. Everything else should be self-explanetory, just put the new dual bearings into the spinner where the old ones where, then put in the mugen piece through both bearings, then shim it on the back side of the spinner so that the spinner doesnt hit the wheel, then put the screw through it all, and put the Ko wheel adaptor on the radio, then screw it all together. Any other questions just ask.
-Mike
1 pair: the new Pro-Line Spinners
1 pair: Pro-Line Spinner wheels
1 3mmx20mm screw
Some CRC 5mm clutch shims (like 6mm O.D. and 5mm I.D.)
One package (two bearings) 12mmx8mm Bearings
" " " " 8mmx5mm Bearings
One of those Mugen Clutch-Holder-Together-Dealies (see picture, the black thing)
Take the bearings out of the stock spinner, then get the grease out of the new bearings, and oil them. Then, fit one 8x5mm bearing into one 12x8mm bearing, then do the same for the other two bearings. Everything else should be self-explanetory, just put the new dual bearings into the spinner where the old ones where, then put in the mugen piece through both bearings, then shim it on the back side of the spinner so that the spinner doesnt hit the wheel, then put the screw through it all, and put the Ko wheel adaptor on the radio, then screw it all together. Any other questions just ask.
-Mike
#209
Originally posted by KO PROPO Staff
!Bling! You are going to blind someone on the driver's stand! Looks good Mike.
!Bling! You are going to blind someone on the driver's stand! Looks good Mike.
#210
Tech Addict
iTrader: (1)
Join Date: Jan 2004
Location: princeton, NJ and wall street, NYC
Posts: 514
Trader Rating: 1 (100%+)
nice wheeel!!!!
i just got my helio today~ man.... it is nice!
just need to get the bigger grip for the handle
a little too small for me.... but sure feel nice anyway!
i just got my helio today~ man.... it is nice!
just need to get the bigger grip for the handle
a little too small for me.... but sure feel nice anyway!