Tamiya TB-Evolution III
#6706
Tech Fanatic
Re: Gears & ratio
Originally posted by Charlie O
Does anyone know the internal drive ration of the EVOIII?, and can i use a standard Kimbrough 48 pitch gear on it like from a TC-3, thanks.
Does anyone know the internal drive ration of the EVOIII?, and can i use a standard Kimbrough 48 pitch gear on it like from a TC-3, thanks.
#6707
Lower Deck.
Guys,
i am about to do a full rebuild of my car over the summer and i wanted to replace the lower deck as it is quite badly scraped.
i have a EVO 3 SK ed.
My problem is i can get a standard deck easily but not the SK ed. I was wondering if it would make much of a difference if i replace the lower deck with the normal 2MM one.
Also since im rebilding it, does anyone have a good setup for a tight outdoor track on ashphelt?
It is the size of 2 tennis courts with lots of twists etc.
I will be running in both 27turn stock and Mod class's
Thanks in advance
Scorpia
i am about to do a full rebuild of my car over the summer and i wanted to replace the lower deck as it is quite badly scraped.
i have a EVO 3 SK ed.
My problem is i can get a standard deck easily but not the SK ed. I was wondering if it would make much of a difference if i replace the lower deck with the normal 2MM one.
Also since im rebilding it, does anyone have a good setup for a tight outdoor track on ashphelt?
It is the size of 2 tennis courts with lots of twists etc.
I will be running in both 27turn stock and Mod class's
Thanks in advance
Scorpia
#6708
Tech Elite
iTrader: (22)
Re: Lower Deck.
Originally posted by scorpia
Guys,
i am about to do a full rebuild of my car over the summer and i wanted to replace the lower deck as it is quite badly scraped.
i have a EVO 3 SK ed.
My problem is i can get a standard deck easily but not the SK ed. I was wondering if it would make much of a difference if i replace the lower deck with the normal 2MM one.
Also since im rebilding it, does anyone have a good setup for a tight outdoor track on ashphelt?
It is the size of 2 tennis courts with lots of twists etc.
I will be running in both 27turn stock and Mod class's
Thanks in advance
Scorpia
Guys,
i am about to do a full rebuild of my car over the summer and i wanted to replace the lower deck as it is quite badly scraped.
i have a EVO 3 SK ed.
My problem is i can get a standard deck easily but not the SK ed. I was wondering if it would make much of a difference if i replace the lower deck with the normal 2MM one.
Also since im rebilding it, does anyone have a good setup for a tight outdoor track on ashphelt?
It is the size of 2 tennis courts with lots of twists etc.
I will be running in both 27turn stock and Mod class's
Thanks in advance
Scorpia
part number 53629
#6710
Thanks Turbo Joe!
Just wanted to say thanks for all your help, and hooking Charlie Jr up with an awesome EVOIII, since it's one of his christmas gifts i guess you helped with the corona chapter of toys for tots thanks again. Charlie O.
#6711
Tech Elite
iTrader: (41)
Re: Thanks Turbo Joe!
Originally posted by Charlie O
Just wanted to say thanks for all your help, and hooking Charlie Jr up with an awesome EVOIII, since it's one of his christmas gifts i guess you helped with the corona chapter of toys for tots thanks again. Charlie O.
Just wanted to say thanks for all your help, and hooking Charlie Jr up with an awesome EVOIII, since it's one of his christmas gifts i guess you helped with the corona chapter of toys for tots thanks again. Charlie O.
Now I just have to get another one for my TB-02 mutant.
#6713
Tech Elite
iTrader: (41)
Re: Re: Re: Thanks Turbo Joe!
Originally posted by Hebiki
socal tuesday? i might have one for you. (another one!)
socal tuesday? i might have one for you. (another one!)
What's the deal..."Honest Lim's Certified Pre-Owned Evo's"?
Last edited by Turbo Joe; 12-13-2004 at 06:26 PM.
#6715
Chris Lim
Chris please remember to give Joe Morgan my shocks when you guys are at SoCal tue Thanks,Charlie.
#6716
Hey Chris do you still want my Evo3SL?
#6719
any body know were to get or have for sale a CF shaft for the evo3. i got me a evo3 SL that i decided to race.. gonna take some work to get it up to speed/reliable :P
#6720
Originally posted by merc-blue
any body know were to get or have for sale a CF shaft for the evo3. i got me a evo3 SL that i decided to race.. gonna take some work to get it up to speed/reliable :P
any body know were to get or have for sale a CF shaft for the evo3. i got me a evo3 SL that i decided to race.. gonna take some work to get it up to speed/reliable :P