RCGT Pics & Paint ONLY! Show them off!
11-24-2009, 07:48 AM
#421
11-24-2009, 11:08 AM
#422
I have posted the below pic in the VTA Pics and Paint thread (http://www.rctech.net/forum/6638475-post1128.html)
The question has come up in the past about whether the Testors Model Master lacquer based paints will adhere properly to lexan bodies. This is a body that I raced for 17 weeks outside on an asphalt parking lot track with wooden barriers & plow discs. Needless to say it has seen it's share of beating and banging. As you can see, the paint is holding up better than the body. I usually back the Model Masters paints with Pactra paint. In this case I used Pactra Outlaw black as it fit in well with the scheme of the car.
The question has come up in the past about whether the Testors Model Master lacquer based paints will adhere properly to lexan bodies. This is a body that I raced for 17 weeks outside on an asphalt parking lot track with wooden barriers & plow discs. Needless to say it has seen it's share of beating and banging. As you can see, the paint is holding up better than the body. I usually back the Model Masters paints with Pactra paint. In this case I used Pactra Outlaw black as it fit in well with the scheme of the car.
12-05-2009, 10:38 AM
#424
A pic of my "RCGT" car after a class project where I added a microprocessor and sensors to allow the car to steer and throttle itself around the track. I've also raced it normally with rubber and foam tires and 8.5 BL-19-27-and mabuchi motors.
just another one of my realistic RCGT bods
12-09-2009, 04:13 PM
#428
12-09-2009, 07:29 PM
#430
12-09-2009, 07:31 PM
#431
12-09-2009, 07:32 PM
#432
Beautiful car M7King!
12-09-2009, 11:37 PM
#435
