Xray NT1
#4876
#4878
#4880
Tech Master
iTrader: (2)
Well, finally completed my car today.
And when I came to balancing/tweaking I was quite surprised.
First it didn't needed any additional weights to balance the car, so no additional weight needed outside of the cars centreline.
All of the 204 grams of ballast is underneath the fueltank.
But when I came to do the cornerweights I was really surprised.
Just set the ride height and trackwidth and this is what the scales red:
I was completely amazed.
The completed car:
No excuses anymore if I don't make the top three in my national championship this year.
And when I came to balancing/tweaking I was quite surprised.
First it didn't needed any additional weights to balance the car, so no additional weight needed outside of the cars centreline.
All of the 204 grams of ballast is underneath the fueltank.
But when I came to do the cornerweights I was really surprised.
Just set the ride height and trackwidth and this is what the scales red:
I was completely amazed.
The completed car:
No excuses anymore if I don't make the top three in my national championship this year.
#4881
Tech Apprentice
What a beauty ! Astonishing job DS.
I'll bet my piggy bank on you. LOL
I'll bet my piggy bank on you. LOL
#4882
excellent job! good luck with the nationals
#4886
#4887
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
Life Batt max size
Quick question,
what are the maximum dimension for a battery pack in the NT1.
Thanks
what are the maximum dimension for a battery pack in the NT1.
Thanks
#4888
Tech Master
iTrader: (2)
Thanks guys, the car really turned out great.
Haha
As you can see in the pictures both of the ARB's are disconnected. With the rear one on the readings don't change.
Connecting the front one, and getting the same readings again is a pain.
Probably one of the blades is bent again.
This is my fourth or fifth set in a year of the 0.7 Fr ARB.
Xray pleeeaase put a wire type ARB in the front, the blade type sucks.
I think I'm going to spend some time this weekend trying to find out how hard it would be to put the Serpent 733 front wishbones and front ARB on to the NT1.
It has been mandatory for two years already in my country. This year it is required for all the european events if I'm not mistaken.
Btw, I hope to finish the files on the carbon brackets this weekend, have been very busy this week with work and school.
As you can see in the pictures both of the ARB's are disconnected. With the rear one on the readings don't change.
Connecting the front one, and getting the same readings again is a pain.
Probably one of the blades is bent again.
This is my fourth or fifth set in a year of the 0.7 Fr ARB.
Xray pleeeaase put a wire type ARB in the front, the blade type sucks.
I think I'm going to spend some time this weekend trying to find out how hard it would be to put the Serpent 733 front wishbones and front ARB on to the NT1.
Btw, I hope to finish the files on the carbon brackets this weekend, have been very busy this week with work and school.
#4890
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
thank you
Thanks
DS
Time to order the batts ...and all the other goodies..
DS
Time to order the batts ...and all the other goodies..