Xray XB4 thread
#9512
Tech Elite
iTrader: (27)
I have this video as you can see in a curve area section.
https://www.youtube.com/watch?v=0idR1FsxFqY
https://www.youtube.com/watch?v=0idR1FsxFqY
#9513
Tech Master
iTrader: (36)
If I were you and we're looking for more steering the first thing I'd do is shorten the rear camber link if you haven't done that already. If that's not enough I'd narrow the front track width moving the dot inward. and move the hinge pins to the bottom position. The +1 inside bottom corner for max front end grip. If that's not enough move the rear hinge pin up, this will keep the rear flatter and give you more steering also...
#9515
What is the internal drive ratio of the 2014 XB4? I am trying to figure out FDR.
Also how do I determine what the FDR should be for different turn motors? My 17.5 Trinity came with a manual that says for 1/10 buggy to be between 5.5-6.5 but I also have a 8.5T and 6.5T tekin and LRP and not sure what the FDR should be for those.
Also how do I determine what the FDR should be for different turn motors? My 17.5 Trinity came with a manual that says for 1/10 buggy to be between 5.5-6.5 but I also have a 8.5T and 6.5T tekin and LRP and not sure what the FDR should be for those.
#9516
What is the internal drive ratio of the 2014 XB4? I am trying to figure out FDR.
Also how do I determine what the FDR should be for different turn motors? My 17.5 Trinity came with a manual that says for 1/10 buggy to be between 5.5-6.5 but I also have a 8.5T and 6.5T tekin and LRP and not sure what the FDR should be for those.
Also how do I determine what the FDR should be for different turn motors? My 17.5 Trinity came with a manual that says for 1/10 buggy to be between 5.5-6.5 but I also have a 8.5T and 6.5T tekin and LRP and not sure what the FDR should be for those.
For the XB4 you can find it here (specs for gearing have been the same since 2013):
http://www.teamxray.com/xb4/2016/specs/
Bent
#9517
On the Xray site you will find all the specifications for each model under "Specs".
For the XB4 you can find it here (specs for gearing have been the same since 2013):
http://www.teamxray.com/xb4/2016/specs/
Bent
For the XB4 you can find it here (specs for gearing have been the same since 2013):
http://www.teamxray.com/xb4/2016/specs/
Bent
#9519
#9520
Tech Adept
Has anyone run a XB4 '16 as a 2wd on carpet? Experiences?
#9521
Fellas quick question.......im new to xb4. I purchased a 15' n wanted to know if it's possible to use a few of the updated parts from the16' mostly interested in the stronger front diff case n front arms! If its possible will i need to also use the 16' front tower?? Thanks
#9522
Fellas quick question.......im new to xb4. I purchased a 15' n wanted to know if it's possible to use a few of the updated parts from the16' mostly interested in the stronger front diff case n front arms! If its possible will i need to also use the 16' front tower?? Thanks
Also, the '16 tower geometry is a little different.
#9523
#9524
I recently completed the build on a 2016, and plan to run 13.5. However, with the stock spur, the largest pinion I can fit is a 26. I'd like to try a 29. Any idea what I might be doing wrong, or did wrong in the build?
Thanks
Thanks