Boss RC Motorsports
05-26-2010, 06:49 PM
#137
I 2nd that on the fan. Those fans are awesome! Instant 30+ temp drop.
05-26-2010, 07:26 PM
#138
Fans on Motors
I strongly recommend the use of an external cooling fan on the motor.
Using a cooling fan helps the motor stay cool and and will help increase product life span and will help reduce the possibility of overheating the motor!
I have always used one and will always use one! The amp draw for our High Speed Fans is extremly minimal. The motor in the fan is a very small BRUSHLESS MOTOR and is very powerful!
but any fan is better then no FAN!
Using a cooling fan helps the motor stay cool and and will help increase product life span and will help reduce the possibility of overheating the motor!
I have always used one and will always use one! The amp draw for our High Speed Fans is extremly minimal. The motor in the fan is a very small BRUSHLESS MOTOR and is very powerful!
but any fan is better then no FAN!
05-26-2010, 07:30 PM
#139
Gearing Question,
Just placed an order for 17.5 boss motor fully blinged up with upgrading bearings and fan.
I am running a Black Diamond v2 has anyone had any experience with gearing round small and med sized track's?
Also what kinda timing do you recommend on the motor?
Just placed an order for 17.5 boss motor fully blinged up with upgrading bearings and fan.
I am running a Black Diamond v2 has anyone had any experience with gearing round small and med sized track's?
Also what kinda timing do you recommend on the motor?
05-27-2010, 05:41 AM
#140
Gearing Question,
Just placed an order for 17.5 boss motor fully blinged up with upgrading bearings and fan.
I am running a Black Diamond v2 has anyone had any experience with gearing round small and med sized track's?
Also what kinda timing do you recommend on the motor?
Just placed an order for 17.5 boss motor fully blinged up with upgrading bearings and fan.
I am running a Black Diamond v2 has anyone had any experience with gearing round small and med sized track's?
Also what kinda timing do you recommend on the motor?
I just started putting your ceramics in and should have your order out by 11:00.
05-27-2010, 04:20 PM
#141
Gearing Question,
Just placed an order for 17.5 boss motor fully blinged up with upgrading bearings and fan.
I am running a Black Diamond v2 has anyone had any experience with gearing round small and med sized track's?
Also what kinda timing do you recommend on the motor?
Just placed an order for 17.5 boss motor fully blinged up with upgrading bearings and fan.
I am running a Black Diamond v2 has anyone had any experience with gearing round small and med sized track's?
Also what kinda timing do you recommend on the motor?
I don't know much about the BD speedo. But I would suggest you do this. Turn the timing up all the way on the motor and run the same pinion you would with a duo if that is what you were running before, then slowly start to go bigger on the pinion if its not hot.
What motor were you running previous to the Boss motor?
05-27-2010, 08:20 PM
#142
Packed and ready to go...I will be hitting up the Jackson RC Memorial Day race this Saturday the 29th. This race is going to be a lot of fun with some serious competition attending. Team drivers Larry Fairtrace, Jason Schreffler, Rui Goncalves, and Kenny Lambert will have there hands full in the super stock class for sure. I will have a supply of motors with me just in case...
Juan, Mark, and Arvin will be battling it out for that top spot in 17.5 with some action packed heats. They will be up against a few of the Nations better drivers. Mike Haynes, Mike Herald JR., Jeff Cuffs to name a few that are registered in the stock class.
Hope to see everyone within driving distance at the track on Saturday!
Juan, Mark, and Arvin will be battling it out for that top spot in 17.5 with some action packed heats. They will be up against a few of the Nations better drivers. Mike Haynes, Mike Herald JR., Jeff Cuffs to name a few that are registered in the stock class.
Hope to see everyone within driving distance at the track on Saturday!
Last edited by ElectriMagician; 05-28-2010 at 05:12 AM.
05-28-2010, 04:12 AM
#143
Packed and ready to go...I will be hitting up the Jackson RC Memorial Day race this Saturday the 29th. This race is going to be a lot of fun with some serious competition attending. Team drivers Larry Fairtrace, Jason Schreffler, and Kenny Lambert will have there hands full in the super stock class for sure. I will have a supply of motors with me just in case...
Juan, Mark, and Arvin will be battling it out for that top spot in 17.5 with some action packed heats. They will be up against a few of the Nations better drivers. Mike Haynes, Mike Herald JR., Jeff Cuffs to name a few that are registered in the stock class.
Hope to see everyone within driving distance at the track on Saturday!
Juan, Mark, and Arvin will be battling it out for that top spot in 17.5 with some action packed heats. They will be up against a few of the Nations better drivers. Mike Haynes, Mike Herald JR., Jeff Cuffs to name a few that are registered in the stock class.
Hope to see everyone within driving distance at the track on Saturday!
05-28-2010, 05:13 AM
#144
05-30-2010, 08:02 PM
#145
Just wanted to thank everyone that was at the Jackson race supporting Boss RC. The team did great even though they we were dealing with a lot of problems. Everyone put forth 100% trying to make the shows and most made it with the exception of me, I think...LOL!
Rui you drove your butt off in both 13.5 and 17.5. Taking down the third spot behind Mike Haynes and Scooby Horton in 17.5. Mark Dawson got served a plate of get out of the way or I'll put in the wall, then getting put in the wall...
! Tough brake but there's always next time....your still learning the locals around here...
!
Joe Wright, Arvin Nano, and Juan Ruiz all were driving cars with Boss 17.5, making the A-main! Congrats goes out to them!
In 13.5 Jason, Larry, and Rui made the show. And there cars were the best I seen them all day. Larry my bad I won't let it happen again!
Here's the A's!
Rui you drove your butt off in both 13.5 and 17.5. Taking down the third spot behind Mike Haynes and Scooby Horton in 17.5. Mark Dawson got served a plate of get out of the way or I'll put in the wall, then getting put in the wall...
! Tough brake but there's always next time....your still learning the locals around here...!Joe Wright, Arvin Nano, and Juan Ruiz all were driving cars with Boss 17.5, making the A-main! Congrats goes out to them!
In 13.5 Jason, Larry, and Rui made the show. And there cars were the best I seen them all day. Larry my bad I won't let it happen again!
Here's the A's!
| + YouTube Video | |
| + YouTube Video | |
Last edited by ElectriMagician; 05-30-2010 at 08:06 PM. Reason: Duplicate Video in post!
05-31-2010, 05:46 PM
#146
the motor was very fast nate.. went from 9th to 4th in the main...
06-01-2010, 11:29 AM
#147
Had great day running both my cars powered with boss motor yesterday at Chaplin. Nate you got pm 
06-01-2010, 12:18 PM
#148
