Boss RC Motorsports
#151
As far as 11.5's goes I can work on any motor from 21.5-9.5 as they all use the same rotor and I would be able to match/blueprint them just like a 17.5 or 13.5 or 10.5 etc! If it is something you would be interested in PM me as I can talk details with you that way! Thanks for your interest in Boss!
#153
I agree with you on that had alot of fun this weekend. Thanks for the help and power with that 422 software. You helped out alot! Look forward to racing with you again at the shootout!
#154
Tech Adept
iTrader: (5)
The 422 is great, they are actually coming out with another version of the supercharger I beleve it is 528. It is supposed to have more bottom end and a lot more top end while running motors cooler and faster with the right settings of coarse. Here is a link to a pdf document that has helped me out figureing out the supercharger. Like Nathan says, max settings don't always mean max performance! http://files.mibosport.com/200001241...g%20points.pdf
#156
tenpins I hope your ready for Saturday. You've been out of the game for a bit!
#157
Registered User
BOSS motors top three so far in Dirt Oval point’s series
Lance DeWitt has first place
Joe Teubner (ME) has second place
Dale Fery has third place
We all are using a 17.5 Boss motor, in our SC10’s and turning 42-43 laps in 5min heats, track is about 80 X 40 with 5 degree banked turns.
Boss Motors kick ass in the dirt in Oregon…
Lance DeWitt has first place
Joe Teubner (ME) has second place
Dale Fery has third place
We all are using a 17.5 Boss motor, in our SC10’s and turning 42-43 laps in 5min heats, track is about 80 X 40 with 5 degree banked turns.
Boss Motors kick ass in the dirt in Oregon…
#158
BOSS motors top three so far in Dirt Oval point’s series
Lance DeWitt has first place
Joe Teubner (ME) has second place
Dale Fery has third place
We all are using a 17.5 Boss motor, in our SC10’s and turning 42-43 laps in 5min heats, track is about 80 X 40 with 5 degree banked turns.
Boss Motors kick ass in the dirt in Oregon…
Lance DeWitt has first place
Joe Teubner (ME) has second place
Dale Fery has third place
We all are using a 17.5 Boss motor, in our SC10’s and turning 42-43 laps in 5min heats, track is about 80 X 40 with 5 degree banked turns.
Boss Motors kick ass in the dirt in Oregon…
Keep up the work!
#159
I just wanted to personally thank all that have been supporting bRCm! I have been very busy with day job along with the motor portion of bRCm! I have been matching and shipping motors more frequently and don't have much time to get on the TECH!
So here's to you guys!
So here's to you guys!
#160
That is what you get when you put out a great product. Now you have no personal life, bad for you and good for me. Now back to making motors Nate.
#161
That's good AOD...all good!
#162
Nate -
Dont forget to bring my Humpty Hemi tomorrow.
Dont forget to bring my Humpty Hemi tomorrow.
#163
I have it bro...no worries!
#164
Just came from the PAPOSWING CHALLENGE...trophy's, good racin' and a BOSS MOTOR giveaway...brought home some hardware today and BOSS represented in every main!!! Nate even got a Tamiya Silver Can motor as a door prize, bet he'll put a BOSS sticker on it and it'll go 2 tenths faster
Nate also got a 1st place win!!!Swing the sword man
Nate also got a 1st place win!!!Swing the sword man