Tamiya TRF415
Tech Addict
iTrader: (1)
Originally Posted by hierog
Stella Models carries them now - $388 + $38 shipping to the states
ive only seen a bad picture of this air scoop.it looks a similar thing to the tc4 air scoop???
it will raise the height of your electrics??
also if your racing on carpet it will suck all the fluff up.if it has fans in there??
and if your racing on tarmac in the summer months it will be sucking up the hot air from the sun baked floor.
just a thought or two
it will raise the height of your electrics??
also if your racing on carpet it will suck all the fluff up.if it has fans in there??
and if your racing on tarmac in the summer months it will be sucking up the hot air from the sun baked floor.
just a thought or two
anybody has a picture of the air scoop for the 415 MSXX
Tech Regular
Originally Posted by GuyIsDamGood
Hey sohlman; I don`t have a TRF 415 MRE.....yet. I have a TB Evo 5 with every TRF Part on it(parts that fit).
I order My own Tamiya Parts or I have the guys from Nagengast Hobbies(Fresh Pond Rd - Queens) or Brooklyn Hobbies(Flatlands - Brooklyn) order me a few parts.
Thanks
Take Care
I order My own Tamiya Parts or I have the guys from Nagengast Hobbies(Fresh Pond Rd - Queens) or Brooklyn Hobbies(Flatlands - Brooklyn) order me a few parts.
Thanks
Take Care
Tech Champion
iTrader: (100)
Originally Posted by GuyIsDamGood
Hey Kwikvdub; you`re the 1st person besides Myself to have a Tamiya top-of-the-line Kit. Where are you getting parts from? You must be ordering your parts straight from Tamiya also(paying those Non-Discount Prices.....Ha Ha!).
I mail order all my parts. You get a great deal but you need patience for delivery................ Can't wait for the summer.
I'll be coming at a track near you!!
Tech Champion
iTrader: (100)
Originally Posted by Smoking motor..
Are they still racing 1/12th round there? last time i was 2 years ago they said on-road was a bit dead round there....
Tech Fanatic
Hey Smoking motor; I don`t run 1/12 Electric.....but I`ve heard from a few guys at Brooklyn Hobbies that it`s still running somewhere(in Long Island).
Hey Kwikvdub; we have to get these Hobby Shops to get with the Tamiya Program.....Ha Ha!
-If you don`t already know; there`s a Track at Floyd Bennett(The ONLY Track near me). The guys at Brooklyn Hobbies said they plan on setting up a few Electric On-Road Races this Season. . . . .We`ll see.
Tamiya does make nice looking Kits(a little too nice to be crashing-up).
-I see I`m not the only 1 getting Tamiya Parts from Aliso Viejo, CA.....and paying those prices. . . . .Glad to see I`m not alone.....Ha Ha!
I`ve installed the Aluminum Wheel Axles on My TB Evo 5. I thought they were the same color as the Aluminum Diffs. . . . .They`re Hard Titanium Colored. But they`re Much lighter than the Steel Axles.
I`ll see how long they last on My Evo 5.
I might race My TB Evo 5 this season at the Floyd Bennett Track. I`ll see you there.
Take Care
Hey Kwikvdub; we have to get these Hobby Shops to get with the Tamiya Program.....Ha Ha!
-If you don`t already know; there`s a Track at Floyd Bennett(The ONLY Track near me). The guys at Brooklyn Hobbies said they plan on setting up a few Electric On-Road Races this Season. . . . .We`ll see.
Tamiya does make nice looking Kits(a little too nice to be crashing-up).
-I see I`m not the only 1 getting Tamiya Parts from Aliso Viejo, CA.....and paying those prices. . . . .Glad to see I`m not alone.....Ha Ha!
I`ve installed the Aluminum Wheel Axles on My TB Evo 5. I thought they were the same color as the Aluminum Diffs. . . . .They`re Hard Titanium Colored. But they`re Much lighter than the Steel Axles.
I`ll see how long they last on My Evo 5.
I might race My TB Evo 5 this season at the Floyd Bennett Track. I`ll see you there.
Take Care
Last edited by GuyIsDamGood; 02-09-2007 at 02:37 PM.
Tech Champion
iTrader: (100)
I've never bought anything from Tamiya directly. Too expensive. Everything is retail price. You should look into the mail order places in Hong Kong.
Me and others are looking into running at Floyd this year. Most of those Nitro Guys are running indoor electric in Long Island.
Should be a great summer of racing, can't wait!
Me and others are looking into running at Floyd this year. Most of those Nitro Guys are running indoor electric in Long Island.
Should be a great summer of racing, can't wait!
Tech Fanatic
Hey Kwikvdub; I will never buy a Kit straight from Tamiya(CRAZY Prices). But I do buy Parts straight from Tamiya.
-I don`t like to deal with those over-seas spots.
Only 3-5 of those Brooklyn Hobbies guys race Electric.....and I believe they run 1/12.
Hopefully this will be a Good Racing year. . . . .We`ll see.
Take Care
-I don`t like to deal with those over-seas spots.
Only 3-5 of those Brooklyn Hobbies guys race Electric.....and I believe they run 1/12.
Hopefully this will be a Good Racing year. . . . .We`ll see.
Take Care
well, i should have my very first 415 in the next week or so. i am getting the 415MSXX. i will be running it in Mod with a 9x1. Futaba S9550 Servo. Novak GTX Esc. i want to run it with a spool instead of a one-way. would i nee to change the centre pulley from one way to direct drive as well? what else would you guys recommend i get for the car?
Originally Posted by RocketRacer
well, i should have my very first 415 in the next week or so. i am getting the 415MSXX. i will be running it in Mod with a 9x1. Futaba S9550 Servo. Novak GTX Esc. i want to run it with a spool instead of a one-way. would i nee to change the centre pulley from one way to direct drive as well? what else would you guys recommend i get for the car?
double post
Originally Posted by RocketRacer
well, i should have my very first 415 in the next week or so. i am getting the 415MSXX. i will be running it in Mod with a 9x1. Futaba S9550 Servo. Novak GTX Esc. i want to run it with a spool instead of a one-way. would i nee to change the centre pulley from one way to direct drive as well? what else would you guys recommend i get for the car?
you need to get the MRE manual and order the top shaft, carbon plate, bearing holders and TA05 center gears, then the 3 parts for the spool.
any idea where i can get the manual from?
do you happen to have the part numbers for the parts you mentioned??
do you happen to have the part numbers for the parts you mentioned??
Originally Posted by RocketRacer
any idea where i can get the manual from?
do you happen to have the part numbers for the parts you mentioned??
do you happen to have the part numbers for the parts you mentioned??
http://www.tamiya.com/japan/rc/rcman...4trf415msx.pdf
This is where you can find it.
thanks bro!!