JL Racing .12
#1396
Tech Elite
iTrader: (19)
well guys , just got back from the South Australian state titles.
i ran the JL evo 3 tuned motor with the 2607 pipe. i also ran Ninja 6 plugs. i changed one plug all weekend in 3lts of fuel .the engine nipped up on the starter box for the A final which i finished 5th. the engine has great power, but its still a bit tight. when it loosens up a bit more i feel i can get a bit more agressive with the tune. i tuned to just make 5 mins, temps were low and power was good. top speed wasnt lacking at all. very very happy with the engine.
i ran the JL evo 3 tuned motor with the 2607 pipe. i also ran Ninja 6 plugs. i changed one plug all weekend in 3lts of fuel .the engine nipped up on the starter box for the A final which i finished 5th. the engine has great power, but its still a bit tight. when it loosens up a bit more i feel i can get a bit more agressive with the tune. i tuned to just make 5 mins, temps were low and power was good. top speed wasnt lacking at all. very very happy with the engine.
#1397
well guys , just got back from the South Australian state titles.
i ran the JL evo 3 tuned motor with the 2607 pipe. i also ran Ninja 6 plugs. i changed one plug all weekend in 3lts of fuel .the engine nipped up on the starter box for the A final which i finished 5th. the engine has great power, but its still a bit tight. when it loosens up a bit more i feel i can get a bit more agressive with the tune. i tuned to just make 5 mins, temps were low and power was good. top speed wasnt lacking at all. very very happy with the engine.
i ran the JL evo 3 tuned motor with the 2607 pipe. i also ran Ninja 6 plugs. i changed one plug all weekend in 3lts of fuel .the engine nipped up on the starter box for the A final which i finished 5th. the engine has great power, but its still a bit tight. when it loosens up a bit more i feel i can get a bit more agressive with the tune. i tuned to just make 5 mins, temps were low and power was good. top speed wasnt lacking at all. very very happy with the engine.
#1399
#1401
Tech Elite
iTrader: (19)
the tuned engine has a 0.2 shim under the sleeve. so this raises the head clearance, then the 0.2 shims on the button make it 0.4mm . its actually shimmed for 20%, so running 16% i would remove one shim. but the engine was still nippin up on the starter box by the Afinal. so i left the 0.2 shims alone till it loosens up some.
Yanman, are you sure its not a radio glitch at all ? the throttle may become unresponsive for a short period of time if you have a glitch ?
Yanman, are you sure its not a radio glitch at all ? the throttle may become unresponsive for a short period of time if you have a glitch ?
#1405
my JL EVO 3 has 0.6 shim, i'm running 25% with IDM #7 plug cos its very hot and humid around my area...
should i remove some shim or just run as it is??...
thanks
should i remove some shim or just run as it is??...
thanks
#1407
#1409