JP Racing First Line .12 on road Stock and Tuned
#108
So guyz is the stock version a screamer??? Does it worth the money?? Straight answers!!! Thank you!
Last edited by staikosn1; 12-30-2008 at 12:24 PM.
#109
I would like a straight answer i am tired of hearing its fast all the motors are fast in the own right i already have a murnan modified rb r3 and a jp eagle tl3t. I am looking for a third motor and i wanted to know if the first line black p3l
is worth getting rather than getting another eagle or murnan i race at 301 raceway and i dont want to hear its fast, or it will keep up with it because a picco will keep up with them out of the corners but after that its curtains. straight answer is it as fast as these motors down the straightaway or not. I only race with real horsepower and i dont want to put a motor that is slower than the motors that i already have in my car.
is worth getting rather than getting another eagle or murnan i race at 301 raceway and i dont want to hear its fast, or it will keep up with it because a picco will keep up with them out of the corners but after that its curtains. straight answer is it as fast as these motors down the straightaway or not. I only race with real horsepower and i dont want to put a motor that is slower than the motors that i already have in my car.
#111
I would like a straight answer i am tired of hearing its fast all the motors are fast in the own right i already have a murnan modified rb r3 and a jp eagle tl3t. I am looking for a third motor and i wanted to know if the first line black p3l
is worth getting rather than getting another eagle or murnan i race at 301 raceway and i dont want to hear its fast, or it will keep up with it because a picco will keep up with them out of the corners but after that its curtains. straight answer is it as fast as these motors down the straightaway or not. I only race with real horsepower and i dont want to put a motor that is slower than the motors that i already have in my car.
is worth getting rather than getting another eagle or murnan i race at 301 raceway and i dont want to hear its fast, or it will keep up with it because a picco will keep up with them out of the corners but after that its curtains. straight answer is it as fast as these motors down the straightaway or not. I only race with real horsepower and i dont want to put a motor that is slower than the motors that i already have in my car.
#112
Hi again folks... In our club events and national races in Greece the monopol has it XRAY/RB R3 or RC.... Last weekend they were 42 (cool hah??) participants and over 60% was XRAY,and only 5 of them were MUGEN!!
I start with MUGEN team in 2 weeks and im thinking the JP P3L black modified/2620 pipe set!!
My question! Can be compared that engine with RB R3/RC, SIRIO STI, etc???
I know that the hands is the way to wins,but as engine is competitive,is it possible to take a better result???
I start with MUGEN team in 2 weeks and im thinking the JP P3L black modified/2620 pipe set!!
My question! Can be compared that engine with RB R3/RC, SIRIO STI, etc???
I know that the hands is the way to wins,but as engine is competitive,is it possible to take a better result???
#113
Tech Champion
iTrader: (3)
Hi again folks... In our club events and national races in Greece the monopol has it XRAY/RB R3 or RC.... Last weekend they were 42 (cool hah??) participants and over 60% was XRAY,and only 5 of them were MUGEN!!
I start with MUGEN team in 2 weeks and im thinking the JP P3L black modified/2620 pipe set!!
My question! Can be compared that engine with RB R3/RC, SIRIO STI, etc???
I know that the hands is the way to wins,but as engine is competitive,is it possible to take a better result???
I start with MUGEN team in 2 weeks and im thinking the JP P3L black modified/2620 pipe set!!
My question! Can be compared that engine with RB R3/RC, SIRIO STI, etc???
I know that the hands is the way to wins,but as engine is competitive,is it possible to take a better result???
#114
Tech Adept
Hi again folks... In our club events and national races in Greece the monopol has it XRAY/RB R3 or RC.... Last weekend they were 42 (cool hah??) participants and over 60% was XRAY,and only 5 of them were MUGEN!!
I start with MUGEN team in 2 weeks and im thinking the JP P3L black modified/2620 pipe set!!
My question! Can be compared that engine with RB R3/RC, SIRIO STI, etc???
I know that the hands is the way to wins,but as engine is competitive,is it possible to take a better result???
I start with MUGEN team in 2 weeks and im thinking the JP P3L black modified/2620 pipe set!!
My question! Can be compared that engine with RB R3/RC, SIRIO STI, etc???
I know that the hands is the way to wins,but as engine is competitive,is it possible to take a better result???
Absolutely no no no!!!
As for the OZ speed tuned spec 2 engine , i've used it for the entire last season(i've won many races with it) and i didn't have the slightest problem ....it was very competitive to much more expensive engines...and don't forget it's a 2007 production year engine...expecting the new OS 12 XZ 2009 would be something better.OS SPEED in not to be confused with the old TZ OS engines.It's the competition engines of OS and they are very quick , reliable and value for money engines.
Staikos1 get rid of that Mugen and JP toys!!!
I'm gonna fly over you , manolopoulos and paylou with my new MMM 353!!!(IT'S COMING...!!!)
#116
Dont forget Nicki i own you something....So be nice!!
Thank you Sam,thats cool.... But we will see in the truck....
#117
If he has a jp eagle tl3-t your mmm 353 will have more bottom end but on a big track nothing and i mean nothing revs!!!!!!! like the tl3-t eagle
#118
The JP black should work with 2630 novarossi pipe as good as JP 2620 pipe??
#120
Tech Adept
iTrader: (3)
hi everyone,
im using JP first line stock version to power up my mtx4r...aand i combine it with nova efra3501 pipe and 41616 manifold...any comment?...thanx...
and i would like to share with u the inside of my JP stock version...after some rework on it...check it out!
keep your engine clean and shining....'blink' ' blink'
im using JP first line stock version to power up my mtx4r...aand i combine it with nova efra3501 pipe and 41616 manifold...any comment?...thanx...
and i would like to share with u the inside of my JP stock version...after some rework on it...check it out!
keep your engine clean and shining....'blink' ' blink'