Hyper TT 4wd 1/10th Truggy Thread
#211
Tech Master
iTrader: (57)
Hi Guys,
We added a Hyper TT section on our website. Quite a few parts from the Hyper 10SC interchanges with the TT
http://www.teamstrc.com/index.php?ro...ory&path=57_61
Steve
We added a Hyper TT section on our website. Quite a few parts from the Hyper 10SC interchanges with the TT
http://www.teamstrc.com/index.php?ro...ory&path=57_61
Steve
Hey Steve, can you make an adjustable battery plate for the TT that let's us move the battery tray forward, unlike the SC where you can adjust backwards?
#213
#214
Tech Addict
common guys post more pictures!!!
anyone else tried mounting the motor on the opposite side like the durango?
anyone else tried mounting the motor on the opposite side like the durango?
#215
Tech Master
iTrader: (40)
Just ordered a 10TT. Will be running in the 1/8 Buggy/Truggy class and the only electric in the class. I have no worries though. My Hyper 10SC is the only electric in our SC class and I do real well with it. Everyone else is running SC8 nitros. I had one but didn't like it and went back to the Hyper 10SC. No need for 1/8 or nitro in my opinion, these Ofna rigs are real screamers.
#216
just got back from the track and the tt is awsome. very fun little car. the only thing i need to do is soften the rear and get the ball ends cause mine keep poping off. also need to stock up on front knuckles since mine poped out. i really hope they make aluminum ones or rpm comes out with some that would be awsome
#217
Rs speed control
Hello,
Is anybody using rs esc with 6.5t on your TT?
Rs 208 default set up ..running 5-7 minutes temp is 161.
Is 160 ok? Any set-up advice?
Thanks
Is anybody using rs esc with 6.5t on your TT?
Rs 208 default set up ..running 5-7 minutes temp is 161.
Is 160 ok? Any set-up advice?
Thanks
#218
Hope that helps!
#219
What size of capacitor and where to solder?
Thanks..
#220
#221
what shock springs does everyone run on these? i need to soften up the rear of mine but have no idea what springs to look at
#222
Tech Master
iTrader: (57)
[IMG] Uploaded with ImageShack.us[/IMG]
Also, is it okay to use the motor mount without the bearing? The bearing is sized for 5mm shaft motors.
#224
Tech Master
iTrader: (33)
Just got the motor ERC mount in yesterday. Thanks for the quick shipping. I mounted a 6.5 Tekin with a 12t 3mm mod1 pinion and noticed the pinion sticks out 2-3mm. So about 3/4 of the spur gear meshes with the pinion. Will that be more than enough? The back of the pinion is already hitting the ERC M-Blox(the cam) and can't push it in further.
[IMG] Uploaded with ImageShack.us[/IMG]
Also, is it okay to use the motor mount without the bearing? The bearing is sized for 5mm shaft motors.
[IMG] Uploaded with ImageShack.us[/IMG]
Also, is it okay to use the motor mount without the bearing? The bearing is sized for 5mm shaft motors.
#225
Tech Addict