Tamiya TRF2WD thread
#2345
Tech Master
iTrader: (13)
That is the local track for me but Saturday was the first time I'd been there since just before the grand opening event. I'll track you down next time you're there for some setup advice. Hoping to make it Friday but that depends on whether or not the diff gears show up in time (had SDRC order some and I also placed an order with TrackStar so I'll have plenty in the near future lol).
What tires are you running? I'm on Bar Codes right now.
What tires are you running? I'm on Bar Codes right now.
As for tires, several of us have been running AKA Rebars in super soft on the rears. We were running the super soft rebars in front as well, but depending on track condition the new Vektors we've been testing are pretty dialed (ran them at OCRC too and they were just awesome)
The plan this weekend is to hit up WCRC on Saturday to start doing some testing/practice for the Reedy race. Was trying to get Randy to go, but he has to work
#2346
Hello Jimmy,
can you please explain to me how go for your Trailing Axle R and +1 set up?
What i have to do on the car?
Thanks for your help.
Bye
WWD
can you please explain to me how go for your Trailing Axle R and +1 set up?
What i have to do on the car?
Thanks for your help.
Bye
WWD
#2347
Tech Elite
iTrader: (25)
Also the set up sheet refers to +1 or 0. This refers to the shim (C1) +1 being if you use it per the instructions or chose to leave it out (which would be "0")
#2348
Just to be sure i understood correctly, i can go R or F by moving the D1 plastic shims...? The +1 to 0 is now clear.
What should i expect from the car going to R or F and to 0 to +1?
Bye
WWD
#2350
Tech Elite
iTrader: (12)
Definitely let me know when you come!
As for tires, several of us have been running AKA Rebars in super soft on the rears. We were running the super soft rebars in front as well, but depending on track condition the new Vektors we've been testing are pretty dialed (ran them at OCRC too and they were just awesome)
The plan this weekend is to hit up WCRC on Saturday to start doing some testing/practice for the Reedy race. Was trying to get Randy to go, but he has to work
As for tires, several of us have been running AKA Rebars in super soft on the rears. We were running the super soft rebars in front as well, but depending on track condition the new Vektors we've been testing are pretty dialed (ran them at OCRC too and they were just awesome)
The plan this weekend is to hit up WCRC on Saturday to start doing some testing/practice for the Reedy race. Was trying to get Randy to go, but he has to work
#2351
Thanks again for your patience and help.
This forum and thread rocks!!
Bye
WWD