I used the header that came with the kit. I have not run the engine at Kraceway or Homestead yet, but am very happy with the pipes performance with this engine at Arcadia. They are Picco based. www.idmtuned.com or www.teamshepherdamerica.com for more info.
Or check out the I.D.M. engines thread here on rctech.

Regarding the .12 engines: Does the new Torque use the same rod as the Evo 4? If its not the same, does the old rod fit?

Both engines have different parts # for the con rods so it might not be compatible but will get u some confirmation on it

Thanks.. I knew they had different part numbers but not sure if they are interchangeable.

10-4 Scott they look identical but it also u never know

Walo ignore it Drew chews to much tabky & Im glad your happy with it Hey Drew did you check the results looks like you got out motored by a stock picco torque
It would of been worse if I did not have some bad pits got stuck on a board for 2 laps

http://www.rctech.net/forum/attachme...ces-round3.txt

Thanks.

, you guys are too much. I just to wanted to know how some racers who tried the Picco line felt about the power of the 7 port. See you guys at the nationals .

Your trippin, trippin bad. See up top where it shows Drew as 2nd.
There was know race for excusses. I know your just ballistic, your so fast the computer can't even keep track.
"It would of been worse if I did not have some bad pits got stuck on a board for 2 laps" maybe you don't need a EDO mod with a ceramic bearing?
Don't worry I'm sure your gonna smoke me at Homestead and you can rant and rave all over here.

Finally Torque by Picco site up and running now!

For Torque engines and parts go to:

www.kevcoracing.com

If you have a sedan rod for the Torque, can you throw it in your bag for the GLC. If I need a rod I will gladly pay you for it.

No ranting n raving your the 1 who exaggerated the fact with your comment

Scott all I have is rods for the 21 in my arsenal

All good. Kevin contacted me and is sending 1 to Rafael on my behalf.

See you in Toledo.

Ran a tank through mine at the club race just to get it tuned in. God you got to love a Picco's bottom end. Torque is an appropriate name