RC10B4.1 FT/WC
#3976
Having the correct front tire wasn't the issue for me, again IMO it's a driver preference. On my track the zero hubs simply work better for me as well as the AE drivers I race with, a 2wd buggy needs to be tuned to what each driver likes IMO, I simply said what worked for me on my track. Which isn't the same for everybody. On your track the .5 hubs might work better for me as well..

#3977
Here is more detailed listing. Prices are off A-Main hobbies.
T4 to sc10 conversion
9814 Battery hold down- 9.00
9816 Front bumper- 9.00
9817 Rear bumper- 10.00
9819 Motor guard- 6.00
9820 Body mounts- 6.00
9821 Body posts- 5.00
9822 Nerf bars- 4.00
9823 SC10 chassis- 22.00
9824 Rear shock tower- 6.00 (optional)
9825 Front shock tower- 5.00
Body- 25.00 and up
Wheels- 12.00 x2
Tires 18.00 x2 and up
Total 167.00
This is the bare minimum needed.
IMO, not worth it since you can usually find an sc10 roller for $150 an below.
#3978
From another thread:
Here is more detailed listing. Prices are off A-Main hobbies.
T4 to sc10 conversion
9814 Battery hold down- 9.00
9816 Front bumper- 9.00
9817 Rear bumper- 10.00
9819 Motor guard- 6.00
9820 Body mounts- 6.00
9821 Body posts- 5.00
9822 Nerf bars- 4.00
9823 SC10 chassis- 22.00
9824 Rear shock tower- 6.00 (optional)
9825 Front shock tower- 5.00
Body- 25.00 and up
Wheels- 12.00 x2
Tires 18.00 x2 and up
Total 167.00
This is the bare minimum needed.
IMO, not worth it since you can usually find an sc10 roller for $150 an below.
Here is more detailed listing. Prices are off A-Main hobbies.
T4 to sc10 conversion
9814 Battery hold down- 9.00
9816 Front bumper- 9.00
9817 Rear bumper- 10.00
9819 Motor guard- 6.00
9820 Body mounts- 6.00
9821 Body posts- 5.00
9822 Nerf bars- 4.00
9823 SC10 chassis- 22.00
9824 Rear shock tower- 6.00 (optional)
9825 Front shock tower- 5.00
Body- 25.00 and up
Wheels- 12.00 x2
Tires 18.00 x2 and up
Total 167.00
This is the bare minimum needed.
IMO, not worth it since you can usually find an sc10 roller for $150 an below.
#3980
Tech Adept
iTrader: (5)
Joined: May 2011
Posts: 106
I was looking into getting either the B4.1 or the Losi 22, and I was wondering what motor setups people are using for running Mod Buggy. This is a very popular class at my local track, and I am looking to get the right motor to help me compete. Thanks!
#3981
if your new go with the 19t class or the stock class so you get the hang of the car without a fast moter. novak,orion,lrp and team epic moters are popular just pick one most have so if you need help its there. goes for the car and the moter..
#3982
Depends on the track. The really fast guys use 8.5/10.5, and some use 13.5. You really don't benefit from the faster motors unless you're really good. Slower is faster for the most part.
#3983
Joined: Aug 2010
Posts: 4,610
From: Vancouver, Washington
#3986
He was refering to the guy saying that he wanted to switch from a T4 to an sc10. To some people short course racing is seen as a "fender banging, crash fest" and jpcopeland was giving him a hard time for wanting to switch, oh well...
#3987
zippy lipos with a stock brushed b4.1 rtr.... good or bad idea?? also trying to figure out which zippys to go for, if anyones uses these batt hit me up!
(looking at eventually getting brushless setup)
(looking at eventually getting brushless setup)
#3988
zippy turnigy and gens ace lipos are awsome and havent failed me for about 6 months of racing them balencing 1/10 times..
#3990



