RcRenew.com engine resizing and epoxy crank re-filling
#572
Added Engine modding services to our website as the request from our customers has been increasing. Also we will be selling modded engines as well. We have been modding engines for years for ourselves and fellow So-Cal racers and customers that requested it, so at our customers request ,here ya go!
Now you guys cant give me a hard time for not having it on the site anymore!!..lol
Thanks guys
Lance
RcRenew

Now you guys cant give me a hard time for not having it on the site anymore!!..lol
Thanks guysLance
RcRenew
#576
Well if the bearings are bad the engine can run irratic, be difficult to tune, have strange sounding noise, leak badly out of front bearing. Also they can be bad and not cause any problems that you can notice. Like if If they feel gritty and not smooth, And if there is to much play or slop in them allowing the crank to move around.(it doesnt take much)
If you like just send them in and we can check all the tolerances for you. Sometimes it can be hard to tell if your not sure what to look for.
Thanks,
Lance
RcRenew.com
#577
Received it this afternoon, Resized it and addresed the piston surface. There were some fine surface scratches and pitting. Cleaned it up and It turned out great. Will E-Mial you tracking and will ship out first thing in the morning.
Thanks so much,
Lance
RcRenew
Thanks so much,
Lance
RcRenew
#578
Got the 3 B5's today bud. Can't wait to get em purring again! Thanks for the awesome super fast service bro. You are truly a major asset to all RC racers. Also thanks again for supporting Team Terribles and the 2 certificates for AMS and PNB. I speak for the whole team when I say it was thoroughly appreciated. You rock bro!
James Allara
President/Founder
Team Terribles
We are slightly less Terrible with you on our team
James Allara
President/Founder
Team Terribles
We are slightly less Terrible with you on our team
#580
Got the 3 B5's today bud. Can't wait to get em purring again! Thanks for the awesome super fast service bro. You are truly a major asset to all RC racers. Also thanks again for supporting Team Terribles and the 2 certificates for AMS and PNB. I speak for the whole team when I say it was thoroughly appreciated. You rock bro!
James Allara
President/Founder
Team Terribles
We are slightly less Terrible with you on our team
James Allara
President/Founder
Team Terribles
We are slightly less Terrible with you on our team

I only wish I could do more!Take care and Thanks,
Lance
#581
#582
#583
Lance,
This is the first time I saw this thread, and from the first few pages I can see there was a lot of doubts about your craftsmanship. Any ways lets keep the past where it belongs... I know when my motor gets weak you'll be the first I think of to bring it back to life...
I looked over the website and seen the services you provide and being in the business of getting the best performance out of the engines. I was thinking why not make the engines look their best again too? Maybe you could get in contact with a local anodize shop and work some thing out to get a deal to re-anodize heads and blocks with custom colors of the customers liking? Or get your own color scheme? So people at a glance will know that engine was modified by RCRenew.... for a modest fee of course
anyways just a thought.
good luck
This is the first time I saw this thread, and from the first few pages I can see there was a lot of doubts about your craftsmanship. Any ways lets keep the past where it belongs... I know when my motor gets weak you'll be the first I think of to bring it back to life...
I looked over the website and seen the services you provide and being in the business of getting the best performance out of the engines. I was thinking why not make the engines look their best again too? Maybe you could get in contact with a local anodize shop and work some thing out to get a deal to re-anodize heads and blocks with custom colors of the customers liking? Or get your own color scheme? So people at a glance will know that engine was modified by RCRenew.... for a modest fee of course
anyways just a thought.
good luck
#584
Lance,
This is the first time I saw this thread, and from the first few pages I can see there was a lot of doubts about your craftsmanship. Any ways lets keep the past where it belongs... I know when my motor gets weak you'll be the first I think of to bring it back to life...
I looked over the website and seen the services you provide and being in the business of getting the best performance out of the engines. I was thinking why not make the engines look their best again too? Maybe you could get in contact with a local anodize shop and work some thing out to get a deal to re-anodize heads and blocks with custom colors of the customers liking? Or get your own color scheme? So people at a glance will know that engine was modified by RCRenew.... for a modest fee of course
anyways just a thought.
good luck
This is the first time I saw this thread, and from the first few pages I can see there was a lot of doubts about your craftsmanship. Any ways lets keep the past where it belongs... I know when my motor gets weak you'll be the first I think of to bring it back to life...
I looked over the website and seen the services you provide and being in the business of getting the best performance out of the engines. I was thinking why not make the engines look their best again too? Maybe you could get in contact with a local anodize shop and work some thing out to get a deal to re-anodize heads and blocks with custom colors of the customers liking? Or get your own color scheme? So people at a glance will know that engine was modified by RCRenew.... for a modest fee of course
anyways just a thought.
good luck
And good ideas, its always good to add new things and options. I will keep that idea in mind. And thanks again for the support. its appreciated
Take care,
Lance,
RcRenew



3Likes