Sirio engines thread
#271
Originally posted by afm
#272
Originally posted by gentleman81
what do the abreviations mean and i only have the car i dont have a break in bench? will that hurt my motor, i dont have the money to mess up a motor or parts to it?
what do the abreviations mean and i only have the car i dont have a break in bench? will that hurt my motor, i dont have the money to mess up a motor or parts to it?
HSN = High Speed Needle
LSN = Low Speed Needle
MSN = Middle Speed Needle
You can do it on the car with everything in place, but instead of the bench tank, do 3 tanks over the starting box, with a rich mixture at a throttle position that the engine doesn't exceed
200°F. Then do the 3 track tanks
For the Sirio the basic carb settings to start are:
HSN = 5.5 turns out
LSN = flush with the end of the slide
MSN = DON'T TOUCH THIS!!!!!
AFM
#273
i think i can handle that!
so over the box means just let it idle off the ground, ill have to get some of that cabinet stuff that doesnt let the dishes slide around and put it on my box so my car doesnt fall off, my box is chrome plated on top and my car would vibe off.
so over the box means just let it idle off the ground, ill have to get some of that cabinet stuff that doesnt let the dishes slide around and put it on my box so my car doesnt fall off, my box is chrome plated on top and my car would vibe off.
#275
Originally posted by gentleman81
i think i can handle that!
so over the box means just let it idle off the ground, ill have to get some of that cabinet stuff that doesnt let the dishes slide around and put it on my box so my car doesnt fall off, my box is chrome plated on top and my car would vibe off.
i think i can handle that!
so over the box means just let it idle off the ground, ill have to get some of that cabinet stuff that doesnt let the dishes slide around and put it on my box so my car doesnt fall off, my box is chrome plated on top and my car would vibe off.
AFM
#276
Originally posted by gentleman81
which of the older sirios had that air leak problem cuz i see alot of them being sold for not alot of money?
which of the older sirios had that air leak problem cuz i see alot of them being sold for not alot of money?
AFM
#277
so i can set my trims high enough to spin the wheels a bit and let it run, checking the temp to keep it under 200 f , do i want to keep it near 200 though? i am a novice i have only broken in a .21 os rg, what is 2 stroking
#278
Originally posted by gentleman81
so i can set my trims high enough to spin the wheels a bit and let it run, checking the temp to keep it under 200 f , do i want to keep it near 200 though? i am a novice i have only broken in a .21 os rg, what is 2 stroking
so i can set my trims high enough to spin the wheels a bit and let it run, checking the temp to keep it under 200 f , do i want to keep it near 200 though? i am a novice i have only broken in a .21 os rg, what is 2 stroking
Keep temperature near 200, under 200 you are not breaking-in the engine, over 205 you are heating it to much at this ppint of initial run.
2 stroking is the condition in which the engine sounds clean, like if you were running, but at break-in period it is kinda like still heavy, spitting some oil through the pipe. Once it is broken-in, and you have settled your HSN for full power you'll notice the difference.
Try getting on to Trinity's web page, and under tips there is an article about tuning your engine correctly writen by J.Cyrul. Hope it is still there. Or try getting some help at the track by some of the experts, it is kinda difficult to explain over here what is 4 stroking and 2 stroking.
AFM
#279
Tech Regular
iTrader: (1)
Joined: Dec 2003
Posts: 472
From: NC USA
Originally posted by afm
Forget about the old Sirios, not enough power, and lots of problems with the 2 needle carb. Just stay with the new Evo's.
AFM
Forget about the old Sirios, not enough power, and lots of problems with the 2 needle carb. Just stay with the new Evo's.
AFM
Mark
#280
I m temted to get the Sirio Evo 2, where can I get it online preferbly HK website. I ve had Sirio 12 TUPPRO AAC before but didn't like it, its just not fast enough compare to my Nova based engines. But I heard the EVO 2 is fast so I m temted to try it.
Q's is it AAC design or ABC?
Q's is it AAC design or ABC?
#281
Originally posted by dameetz
I m temted to get the Sirio Evo 2, where can I get it online preferbly HK website. I ve had Sirio 12 TUPPRO AAC before but didn't like it, its just not fast enough compare to my Nova based engines. But I heard the EVO 2 is fast so I m temted to try it.
Q's is it AAC design or ABC?
I m temted to get the Sirio Evo 2, where can I get it online preferbly HK website. I ve had Sirio 12 TUPPRO AAC before but didn't like it, its just not fast enough compare to my Nova based engines. But I heard the EVO 2 is fast so I m temted to try it.
Q's is it AAC design or ABC?



1Likes