4LikesNEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
I want to cook it like you , but it refused to be hot!
01-24-2011 | 10:00 PM
#2657
Tech Initiate
Joined: Nov 2009
Posts: 28
From: TAUNTON UK
Smile Dave they are due in in the next 5 days or so are airborne as we speak from Sunny China.
Havent got a lot so if you want one let me know will set you up pre order, www.racersinexile.org.uk
Havent got a lot so if you want one let me know will set you up pre order, www.racersinexile.org.uk
Do you want a pm?
Dave
01-24-2011 | 11:57 PM
#2659
Tech Elite
Joined: Mar 2003
Posts: 2,575
From: The Sky
01-25-2011 | 12:42 AM
#2661
Tech Adept
Joined: Oct 2007
Posts: 185
I was running 101224 software yesterday and i lost the sensor positions on the speedo, it was stalling on the line and in the race at some points and there was another racer whos car stalled on the line with 224 software, much like the gm issue. so I think it may be one of the bugs. Anyway got home last night (after trying to fix track side with some help) uninstalled the pc software installed the new software, flashed the speedo back to 518 and problem fixed. I will update to the 119 when the english instructions are out.
01-25-2011 | 02:18 AM
#2663
Tech Adept
Joined: Feb 2010
Posts: 141
From: UK
01-25-2011 | 04:01 AM
#2664
Tech Regular
Joined: Nov 2005
Posts: 343
Yes, I think you are correct.
During some tests we did, the only good way to improve the speed for these kinds of motors is lower the FDR. Because these motors' RPM can't be increased as expected when boost timing apply on it and it creates torque more than enough with that RPM.
I think 101224 is better for these kinds of motors.
During some tests we did, the only good way to improve the speed for these kinds of motors is lower the FDR. Because these motors' RPM can't be increased as expected when boost timing apply on it and it creates torque more than enough with that RPM.
I think 101224 is better for these kinds of motors.
01-25-2011 | 04:27 AM
#2665
Tech Rookie
Joined: Apr 2006
Posts: 7
From: Doncaster, England
Set up suggestions for new software
Having just bought the HB extreme, I am looking for set up suggestions for new software 110119 .
I am currently running xray 007 with Novak ss 10.5. The carpet track is about 30x 20 metres. Have started with default setting and put on about 35% drag brakes. and have FDR about 6. Also run rubber tyres.
Thx
I am currently running xray 007 with Novak ss 10.5. The carpet track is about 30x 20 metres. Have started with default setting and put on about 35% drag brakes. and have FDR about 6. Also run rubber tyres.
Thx
01-25-2011 | 04:42 AM
#2666
Tech Adept
Joined: Feb 2010
Posts: 141
From: UK
I tested 1224 on Saturday and was very impressed with it, that was with a GM 13.5 with a 12.5mm 1600 gauss rotor. After reading your comment that 1224 is better with this kind of motor, and thinking that 1224 had bugs, i'm now confused. Am I better using 119, or using 1224?
, just go with 518 or 110119. Is the 110108 ok to be used as well?
01-25-2011 | 04:48 AM
#2667
Tech Regular
Joined: Oct 2008
Posts: 398
From: Sweden
hey all!
I need some help here.
i have a massive delay when braking with the HW Extreme stock ESC. When braking it has some delay, i have adjusted the transmitter EPA to 135% brake and didnt really feel any difference. So what can i do to make it better?
I need some help here.
i have a massive delay when braking with the HW Extreme stock ESC. When braking it has some delay, i have adjusted the transmitter EPA to 135% brake and didnt really feel any difference. So what can i do to make it better?
01-25-2011 | 05:14 AM
#2668
Tech Initiate
Joined: Nov 2009
Posts: 28
From: TAUNTON UK
01-25-2011 | 05:37 AM
#2669
Tech Adept
iTrader: (6)
Joined: Oct 2009
Posts: 176
little help
Guys, this is the first hobbying (Xtreme) I have ever owned (previous SP owner) so was hoping someone would pm me some help.
1. I have the SP LCD program card but for some reason I cannot update it to the HW firmware - any ideas why or how I can go about this as the current software on it is the SP and not sure if this will allow it to recognise the ESC or allow me to use it once I disconnect from the pc
2. I have downloaded the latest firmware (v3.0_110119STOCK) and can someone explain to me what the follwoing are - preferrably to SP language lol -
Boost timing - on the instructions this is upto 26.25 degrees - but the standard setting here is 32 degrees
Turbo open time
Turbo Timing - on the instructions this is upto 8 degrees - but the standard setting here is 24 degrees
Boost timing ACC - is this timing punch?
On the instructions I received with the ESC thse settings are not listed
Finally - there wouldnt be someone with a base setup I can start from for a 21.5 on road med size medium to high traction? Unsure how close the hw esc is to the sp esc where I was running around 4.1 FDR and eveything almost maxed out
Any help would be highly appreciated guys
Cheers
1. I have the SP LCD program card but for some reason I cannot update it to the HW firmware - any ideas why or how I can go about this as the current software on it is the SP and not sure if this will allow it to recognise the ESC or allow me to use it once I disconnect from the pc
2. I have downloaded the latest firmware (v3.0_110119STOCK) and can someone explain to me what the follwoing are - preferrably to SP language lol -
Boost timing - on the instructions this is upto 26.25 degrees - but the standard setting here is 32 degrees
Turbo open time
Turbo Timing - on the instructions this is upto 8 degrees - but the standard setting here is 24 degrees
Boost timing ACC - is this timing punch?
On the instructions I received with the ESC thse settings are not listed
Finally - there wouldnt be someone with a base setup I can start from for a 21.5 on road med size medium to high traction? Unsure how close the hw esc is to the sp esc where I was running around 4.1 FDR and eveything almost maxed out
Any help would be highly appreciated guys
Cheers
01-25-2011 | 05:45 AM
#2670
Tech Master
Joined: May 2010
Posts: 1,098
From: Oxfordshire, UK
Guys, this is the first hobbying (Xtreme) I have ever owned (previous SP owner) so was hoping someone would pm me some help.
1. I have the SP LCD program card but for some reason I cannot update it to the HW firmware - any ideas why or how I can go about this as the current software on it is the SP and not sure if this will allow it to recognise the ESC or allow me to use it once I disconnect from the pc
2. I have downloaded the latest firmware (v3.0_110119STOCK) and can someone explain to me what the follwoing are - preferrably to SP language lol -
Boost timing - on the instructions this is upto 26.25 degrees - but the standard setting here is 32 degrees
Turbo open time
Turbo Timing - on the instructions this is upto 8 degrees - but the standard setting here is 24 degrees
Boost timing ACC - is this timing punch?
On the instructions I received with the ESC thse settings are not listed
Finally - there wouldnt be someone with a base setup I can start from for a 21.5 on road med size medium to high traction? Unsure how close the hw esc is to the sp esc where I was running around 4.1 FDR and eveything almost maxed out
Any help would be highly appreciated guys
Cheers
1. I have the SP LCD program card but for some reason I cannot update it to the HW firmware - any ideas why or how I can go about this as the current software on it is the SP and not sure if this will allow it to recognise the ESC or allow me to use it once I disconnect from the pc
2. I have downloaded the latest firmware (v3.0_110119STOCK) and can someone explain to me what the follwoing are - preferrably to SP language lol -
Boost timing - on the instructions this is upto 26.25 degrees - but the standard setting here is 32 degrees
Turbo open time
Turbo Timing - on the instructions this is upto 8 degrees - but the standard setting here is 24 degrees
Boost timing ACC - is this timing punch?
On the instructions I received with the ESC thse settings are not listed
Finally - there wouldnt be someone with a base setup I can start from for a 21.5 on road med size medium to high traction? Unsure how close the hw esc is to the sp esc where I was running around 4.1 FDR and eveything almost maxed out
Any help would be highly appreciated guys
Cheers
For 21.5 you can start with the 17.5 settings in the instructions and maybe add a bit more boost timing and/or drop the FDR.