Scale RC
#1412
edongs: Maki-car pool ka na lang with one of the scalers. 
c-brain: Welcome to the thread chief. I think I saw your rig last Saturday in Mega. Tapusin mo na yan tapos sumama ka samin sa Sunday sa Angono, binyagan natin Hilux mo.
toothicure: Technically, your rig is a crawler. Pero pwedeng-pwede isabak sa trail yan, hanapan mo na lang ng scale body. Ingat lang baka ma-stress yung worm gears, medyo nag-iinit yan in long runs and scalers in this thread trail for a minimum of two hours, non-stop.
somar: Ihabol mo na sa Sunday yan, we'll wait for you sa Tropical Hut Taytay, 7am.
fEn: Na-miss mo no?

c-brain: Welcome to the thread chief. I think I saw your rig last Saturday in Mega. Tapusin mo na yan tapos sumama ka samin sa Sunday sa Angono, binyagan natin Hilux mo.

toothicure: Technically, your rig is a crawler. Pero pwedeng-pwede isabak sa trail yan, hanapan mo na lang ng scale body. Ingat lang baka ma-stress yung worm gears, medyo nag-iinit yan in long runs and scalers in this thread trail for a minimum of two hours, non-stop.

somar: Ihabol mo na sa Sunday yan, we'll wait for you sa Tropical Hut Taytay, 7am.

fEn: Na-miss mo no?

#1416
Tech Initiate
iTrader: (1)
Joined: Aug 2007
Posts: 23
From: Alabang/Muntinlupa
Thanks fen and maddafunker for the welcome and the vids. Wow, mukhang mahihirapan pa makipagsabayan kit ko sa inyo. ehehehe. May prior commitment ako this coming Sunday sa UP so hopefully sa susunod akong trail run makakasama.
Sa mga hilifters.... how did you go about with lifting the ground clearance and softening the suspension? I recently did a testrun sa backyard namin and noticed na matigas yung stock leaf springs and dampers, while the skidplates that protect the tranny sits kinda low.
Sa mga hilifters.... how did you go about with lifting the ground clearance and softening the suspension? I recently did a testrun sa backyard namin and noticed na matigas yung stock leaf springs and dampers, while the skidplates that protect the tranny sits kinda low.
#1417
Thanks fen and maddafunker for the welcome and the vids. Wow, mukhang mahihirapan pa makipagsabayan kit ko sa inyo. ehehehe. May prior commitment ako this coming Sunday sa UP so hopefully sa susunod akong trail run makakasama.
Sa mga hilifters.... how did you go about with lifting the ground clearance and softening the suspension? I recently did a testrun sa backyard namin and noticed na matigas yung stock leaf springs and dampers, while the skidplates that protect the tranny sits kinda low.
Sa mga hilifters.... how did you go about with lifting the ground clearance and softening the suspension? I recently did a testrun sa backyard namin and noticed na matigas yung stock leaf springs and dampers, while the skidplates that protect the tranny sits kinda low.
#1418
Thanks fen and maddafunker for the welcome and the vids. Wow, mukhang mahihirapan pa makipagsabayan kit ko sa inyo. ehehehe. May prior commitment ako this coming Sunday sa UP so hopefully sa susunod akong trail run makakasama.
Sa mga hilifters.... how did you go about with lifting the ground clearance and softening the suspension? I recently did a testrun sa backyard namin and noticed na matigas yung stock leaf springs and dampers, while the skidplates that protect the tranny sits kinda low.
Sa mga hilifters.... how did you go about with lifting the ground clearance and softening the suspension? I recently did a testrun sa backyard namin and noticed na matigas yung stock leaf springs and dampers, while the skidplates that protect the tranny sits kinda low.
here are some hop-ups from RC4WD for your Hilift to address your concerns:
Clocked Tranny Cover, this will improve the tranny clearance
Steel Shooter Shackle, improve articulation
Soft Leaf Springs for Hilift...
T-Box...improves articulation
Ultra Soft Delrin Leaf Spring.those are the hop up parts if you want to retain the original look of the hilift. but if you want to improve the overall performance JunFac has a coilover, 4 link suspension upgrade.
#1419
c-brain: Here's a link that may be useful for your Hilux build ... http://www.junfac.com/shop/index.php...2559c4415dcf21
#1420
Tech Initiate
iTrader: (1)
Joined: Aug 2007
Posts: 23
From: Alabang/Muntinlupa
Wow, thanks for the tips Factory48, Crazy Crawler, and Maddafunker. Nakakalula pala sa dami ng options. 
I've got my eye on the clocked tranny and soft leaf springs. Are any of these available locally or my only option is to order directly online?
Nakapaglalaway yung Junfac hopups.
Kung kaya lang ng budget....

I've got my eye on the clocked tranny and soft leaf springs. Are any of these available locally or my only option is to order directly online?
Nakapaglalaway yung Junfac hopups.
Kung kaya lang ng budget....
#1421
Joined: Mar 2002
Posts: 2,834
From: Singapore
Wow, thanks for the tips Factory48, Crazy Crawler, and Maddafunker. Nakakalula pala sa dami ng options. 
I've got my eye on the clocked tranny and soft leaf springs. Are any of these available locally or my only option is to order directly online?
Nakapaglalaway yung Junfac hopups.
Kung kaya lang ng budget....

I've got my eye on the clocked tranny and soft leaf springs. Are any of these available locally or my only option is to order directly online?
Nakapaglalaway yung Junfac hopups.
Kung kaya lang ng budget....Here's his build at RC4WD:
http://www.rc4wdforum.com/showthread.php?t=7052
RC4WD options are totally scale (same as what people have on their 1:1) and improves performance tremendously, as well. Junfac is the cheaper alternative but not that scale realistic at all.
But if you plan to comp, might as well go SCX. You get Performance and Parts durability out of the box at a reasonable budget. Oh yeah, I still do not have an SCX

Only drawback, is a that an MFC-02 if you plan to have it, won't fit with the RC4WD.
#1422
Tech Initiate
iTrader: (1)
Joined: Aug 2007
Posts: 23
From: Alabang/Muntinlupa
Thanks siggy. Lots of pointers to be found in the highlift build in your link.
I've got my eyes on a Honcho kit din, but I prefer to enjoy building and running the highlift muna. I might also need to sell off a couple of on-road kits din muna to fund me a nice Honcho.
ehehehe
I've got my eyes on a Honcho kit din, but I prefer to enjoy building and running the highlift muna. I might also need to sell off a couple of on-road kits din muna to fund me a nice Honcho.
ehehehe
#1423
Joined: Mar 2002
Posts: 2,834
From: Singapore
Thanks siggy. Lots of pointers to be found in the highlift build in your link.
I've got my eyes on a Honcho kit din, but I prefer to enjoy building and running the highlift muna. I might also need to sell off a couple of on-road kits din muna to fund me a nice Honcho.
ehehehe
I've got my eyes on a Honcho kit din, but I prefer to enjoy building and running the highlift muna. I might also need to sell off a couple of on-road kits din muna to fund me a nice Honcho.
ehehehe
I've got a few 3speed Trucksters, and here's are my favorite pair for scale realism ...
Welcome to the awesome World of RC Crawler/Scale!
#1425
Latest update on who will attend:
Agree ba kayo sa pairing na toh?
1. Cleng (Honcho)
2. Noel (cc01)
3. Jeff (Dingo)
4. Elpaks (Honcho)
5. Keno (Dingo)
6. Sir Miles? (Honcho)
7. Edong (Honcho)
8. Somar (Gelande)
9. Miker (Dingo wheelbase)
10. Dax (Dingo)
Evenly distributed na halos ang mga naka honcho
Dont forget to bring wide brim hats! and long sleeve shirts and to apply a sun block lotion. Be prepared for a 2-3hr trail run. bring spare batteries for both ur kit and transmitter.
I have 3-4 spare tow ropes
C u all by 7 am at Tropical hut! Maiinit ang ara ngayon SOBRA!
-Miker
Agree ba kayo sa pairing na toh?
1. Cleng (Honcho)
2. Noel (cc01)
3. Jeff (Dingo)
4. Elpaks (Honcho)
5. Keno (Dingo)
6. Sir Miles? (Honcho)
7. Edong (Honcho)
8. Somar (Gelande)
9. Miker (Dingo wheelbase)
10. Dax (Dingo)
Evenly distributed na halos ang mga naka honcho
Dont forget to bring wide brim hats! and long sleeve shirts and to apply a sun block lotion. Be prepared for a 2-3hr trail run. bring spare batteries for both ur kit and transmitter.
I have 3-4 spare tow ropes

C u all by 7 am at Tropical hut! Maiinit ang ara ngayon SOBRA!
-Miker
Last edited by msdelr; 09-17-2010 at 02:31 AM.



4Likes
