Scale RC
#1397
Guys, sa Sunday nalang para mas marami makasama. OKIDOK?
We have the following scalers available this Sunday, Noel hintayin ko feedback mo ha?
Ill count you in?
1. Dax
2. Miker
3. Cleng
4. Miles?
5. Noel (Mix)?
Paging Keno, Jess, RC Jedi and Jeff and to anyone who is interested to join. SALI NA!!
We have the following scalers available this Sunday, Noel hintayin ko feedback mo ha?
Ill count you in?
1. Dax
2. Miker
3. Cleng
4. Miles?
5. Noel (Mix)?
Paging Keno, Jess, RC Jedi and Jeff and to anyone who is interested to join. SALI NA!!
#1399
Sayang! I'd love to go but I'm in the US right now. Contact Elpaks, Askal, and Edongs through Cleng. I'm sure they'd love to join you guys.
Miker, you can look for Manong Rick at the Factory and ask him for bridge materials that we have.
Miker, you can look for Manong Rick at the Factory and ask him for bridge materials that we have.
#1400
my truggy is not running yet...i'm still waiting for the heavy coils to support the overweight chassis/body. the shocks right now is too weak, parang ako naka droop setup.
#1401
To all scale heads: Lets do trailing this coming weekend sa Angono?
Sat or Sunday? 7am Tropical hut?
Lets call it Scale Truck Challenge I OR
________ Trophy?
We can crawl going up "The peak" in pairs. Next time pwdeng ibang naman ang magpartner. Question is how do choose partners?
Objective is both rigs should reach the peak.
Rqts?:
1. Each pair must bring a tow line
2. A makeshift bridge (logs or metal plates) to cross obstacles. Scale ropes to tie the logs together
3. Prepare also for a axle deep water crossing
Game Option next time pag meron na ang lahat.
1. Each rig should carry a spare tire - ok ba sa inyo? part of the game is you must replace a tire during the trail run. (I dont have a spare
)
2. A working winch - During the event you are required to recover an overturned rig using your winch.
Who's in?
-Miker
just bring a wide brim hat, long sleeves, Water, Shoes (baka madulas kayo)
Sat or Sunday? 7am Tropical hut?
Lets call it Scale Truck Challenge I OR
________ Trophy?

We can crawl going up "The peak" in pairs. Next time pwdeng ibang naman ang magpartner. Question is how do choose partners?
Objective is both rigs should reach the peak.
Rqts?:
1. Each pair must bring a tow line
2. A makeshift bridge (logs or metal plates) to cross obstacles. Scale ropes to tie the logs together
3. Prepare also for a axle deep water crossing
Game Option next time pag meron na ang lahat.
1. Each rig should carry a spare tire - ok ba sa inyo? part of the game is you must replace a tire during the trail run. (I dont have a spare
)2. A working winch - During the event you are required to recover an overturned rig using your winch.
Who's in?
-Miker
just bring a wide brim hat, long sleeves, Water, Shoes (baka madulas kayo)
1. Dax
2. Cleng
3. Jeff
4. Miker
Still waiting for confirmation
5. Noel
6. Miles
Paging: Keno, Askal, Edongs ...You?
Sali na! @Jess: Tnx! I have chopsticks na for my makeshift bridge
and nylon ropes. Kelan uwi mo? @Crazy: Ok, ill wait for it to get finished.. sana maisama mo sa trail.
#1402
Guys got problem controlling your 3racing winch with a 2pos 3rd channel switch? If yes read on
What I did was I just soldered a diode in series with the winch motor either wire will work. Basically the diode prevents back flow of the current which essentially turn one of the direction OFF and the other ON. The diode has a polarity but since the winch will spool back at the end of the winch cable length so polarity doesn't matter you can solder it in series in any direction. Spool direction is just a matter of personal preference or if you prefer the cables spool in under real. You'll need to manually pull the hook to release more cable doh.
Now im not good in electronics I dont even know what are the specs of the diode I used but basically it has a max reverse voltage of 12V which is more than enough since I only run on 6V (BEC supplied) power. Its as big as 1/4 watt resistor. However I notice a slight power loss maybe because my diode measured some ON resistance (if that is what it is called) that probably drop the actual winch motor input voltage or maybe just because of the extra load on my light system. If you or anyone can recommend a better diode specs, Im be very much thank full. BTW although I have not encountered any problem so far do this at your own risk.
;-)
Here's a picture and a short vid please excuse the poor phone cam quality vid.

http://www.youtube.com/watch?v=Q49pN_TUFWU
What I did was I just soldered a diode in series with the winch motor either wire will work. Basically the diode prevents back flow of the current which essentially turn one of the direction OFF and the other ON. The diode has a polarity but since the winch will spool back at the end of the winch cable length so polarity doesn't matter you can solder it in series in any direction. Spool direction is just a matter of personal preference or if you prefer the cables spool in under real. You'll need to manually pull the hook to release more cable doh.
Now im not good in electronics I dont even know what are the specs of the diode I used but basically it has a max reverse voltage of 12V which is more than enough since I only run on 6V (BEC supplied) power. Its as big as 1/4 watt resistor. However I notice a slight power loss maybe because my diode measured some ON resistance (if that is what it is called) that probably drop the actual winch motor input voltage or maybe just because of the extra load on my light system. If you or anyone can recommend a better diode specs, Im be very much thank full. BTW although I have not encountered any problem so far do this at your own risk.
;-)
Here's a picture and a short vid please excuse the poor phone cam quality vid.

http://www.youtube.com/watch?v=Q49pN_TUFWU
#1403
Confirmed na sasama on Sunday Sept 19, 2010 7:00am Angono Trail run.
1. Dax
2. Cleng
3. Jeff
4. Miker
Still waiting for confirmation
5. Noel
6. Miles
Paging: Keno, Askal, Edongs ...You?
Sali na!
@Jess: Tnx! I have chopsticks na for my makeshift bridge
and nylon ropes. Kelan uwi mo?
@Crazy: Ok, ill wait for it to get finished.. sana maisama mo sa trail.
1. Dax
2. Cleng
3. Jeff
4. Miker
Still waiting for confirmation
5. Noel
6. Miles
Paging: Keno, Askal, Edongs ...You?
Sali na! @Jess: Tnx! I have chopsticks na for my makeshift bridge
and nylon ropes. Kelan uwi mo? @Crazy: Ok, ill wait for it to get finished.. sana maisama mo sa trail.
kaya po di ako makakasama mga sir. cleng! daanan mo ako sa condo!! hahaha!
#1404
Tech Initiate
iTrader: (1)
Joined: Aug 2007
Posts: 23
From: Alabang/Muntinlupa
Greetings po.
Makiki-salingpusa po sana ako sa inyo. Currently working on a Tamiya F-350 highlift project na hopefully would be able to join your scale or trail runs someday. Some of you may have seen it (puti na highlift) nung 2nd day ng TAC in Megasmall na pakalat-kalat sa inspector's table/area. Inspector Simon was helping me get the necessary parts so I can link the steering to connect to the steering servo kaya ko dinala nun.
Anyway, are there any scalers dito sa southern Metro Manila? Any good locations for trail runs?
Makiki-salingpusa po sana ako sa inyo. Currently working on a Tamiya F-350 highlift project na hopefully would be able to join your scale or trail runs someday. Some of you may have seen it (puti na highlift) nung 2nd day ng TAC in Megasmall na pakalat-kalat sa inspector's table/area. Inspector Simon was helping me get the necessary parts so I can link the steering to connect to the steering servo kaya ko dinala nun.
Anyway, are there any scalers dito sa southern Metro Manila? Any good locations for trail runs?
#1405
miker: Game na ako Sunday.
c-brain: welcome to the thread!
As far as I know, Its me, maddafunker & drr888 who are from the south area (paranaque).(pardon my ignorance kung may iba pang scaleheads from the south na di ko nabanggit)
. As for trail spots, I still havent seen any within the same level as that of angono where we usually trail, baka sa Los Banos pero di ko pa na explore. Hanap tayo!
Hope you can join us soon, madami din may highlift sa grupo.
c-brain: welcome to the thread!
As far as I know, Its me, maddafunker & drr888 who are from the south area (paranaque).(pardon my ignorance kung may iba pang scaleheads from the south na di ko nabanggit)
. As for trail spots, I still havent seen any within the same level as that of angono where we usually trail, baka sa Los Banos pero di ko pa na explore. Hanap tayo!Hope you can join us soon, madami din may highlift sa grupo.
#1407
Tech Initiate
iTrader: (1)
Joined: Aug 2007
Posts: 23
From: Alabang/Muntinlupa
c-brain: welcome to the thread!
As far as I know, Its me, maddafunker & drr888 who are from the south area (paranaque).(pardon my ignorance kung may iba pang scaleheads from the south na di ko nabanggit)
. As for trail spots, I still havent seen any within the same level as that of angono where we usually trail, baka sa Los Banos pero di ko pa na explore. Hanap tayo!
Hope you can join us soon, madami din may highlift sa grupo.
As far as I know, Its me, maddafunker & drr888 who are from the south area (paranaque).(pardon my ignorance kung may iba pang scaleheads from the south na di ko nabanggit)
. As for trail spots, I still havent seen any within the same level as that of angono where we usually trail, baka sa Los Banos pero di ko pa na explore. Hanap tayo!Hope you can join us soon, madami din may highlift sa grupo.
#1409
somar: welcome to scaleheads sir! aabot yan bowsing sa sunday! nice rigs btw. 7am meeting place at tropical hut parking lot, taytay rizal.
c-brain: i'm also a hilift driver, nilalaro ko din ang kit sa angono! sarap! see you sir!
keno: anu dalin mo? hilift o dingo?
miles: see you sir!
jedi: paramdam ka naman!
miker/dax/mix/scaleheads: rain or shine! TRAIL! TRAIL! TRAIL!
c-brain: i'm also a hilift driver, nilalaro ko din ang kit sa angono! sarap! see you sir!
keno: anu dalin mo? hilift o dingo?
miles: see you sir!
jedi: paramdam ka naman!

miker/dax/mix/scaleheads: rain or shine! TRAIL! TRAIL! TRAIL!
#1410
scaleheads: angono trail vids, we truly miss!
thanks maddafunker-dax and scaramouche for the vids.

| + YouTube Video | |
| + YouTube Video | |
| + YouTube Video | |
thanks maddafunker-dax and scaramouche for the vids.



4Likes
see you scaleheads on sunday!