8T 2.0
#7291
The absolute best way is to use a set up system. But I was taught here buy a local pro not to drop, just push down on the truck and let it rebound, then do the camber.....
#7292
clutch shoe questions...
do springs wear out? and at what point do you change shoes? is there a measurement?
ive heard losi long wear shoes, and 2 green and 2 black springs. anyone's preference?
do springs wear out? and at what point do you change shoes? is there a measurement?
ive heard losi long wear shoes, and 2 green and 2 black springs. anyone's preference?
#7293
I run dyn Maxlife shoes - similar to losi LL, and gold and silver springs, really like that setup..
#7294
Measure 23.4, any thing less is a worn out. Thanks, Nick for the pic.
#7295
I have found that as long as you are consistant in the manner that you check your ride height and camber, all is well. The problem with the drop
method, that I don't like, is that unless you have an exact measurement of
the drop, you will get inconsistant readings. I push the car/truck down evenly, in the center of the front and rear towers before my measurements.
Never failed me yet and very consistant as far as repeatability(if thats even
a word, lol). Plus, I like to see how the shocks are working, rebound-wise. If
you've ever been burned by a sticky shock shaft o-ring/seal you'd understand why.
Now, if I could only find an exact way to set front toe, without
a Hudy station, I'd be perfectly happy. I'm good with just eyeballing it for
now though.
method, that I don't like, is that unless you have an exact measurement of
the drop, you will get inconsistant readings. I push the car/truck down evenly, in the center of the front and rear towers before my measurements.
Never failed me yet and very consistant as far as repeatability(if thats even
a word, lol). Plus, I like to see how the shocks are working, rebound-wise. If
you've ever been burned by a sticky shock shaft o-ring/seal you'd understand why.

Now, if I could only find an exact way to set front toe, without
a Hudy station, I'd be perfectly happy. I'm good with just eyeballing it for
now though.
#7296
#7297

#7303
#7304




