EB Mods JS Engine
#766
Just got my JS Full Mod in today from Absolutehobbyz. I bolted it up with an 086 pipe. I can't wait to run my truggy with this engine. I won't be at the Hut this weekend, going backpacking. Hopefully I can catch the next one.
#769
Tech Adept
Joined: Jun 2009
Posts: 221
From: Tauranga, New Zealand
Hi, are the 'O' rings in the low speed and high speed needle the same size? I just put in new 'O' rings in the HSN and they were extremely tight and hard to fit and I though maybe I had the wrong size.
#770
ran my raceprep for the first time today. all i can i say is WOW!! it's in a losi 8t 2.0 with a 7mm insert, p4 plug and 086 pipe. got 11mins. love this motor. if u r looking for an awsome piece look no futher.
#771
back home with FULL mod as race prep was not available (made a huge order at amain to smuggle back home)
will try it on Wednesday with my old EB MODS 2041 pipe so I can compare (already tested JP-4 and 9901)
will try it on Wednesday with my old EB MODS 2041 pipe so I can compare (already tested JP-4 and 9901)
#772
#776
#780
I have been reading through all the post and just wanted to give my input and expierence with the JS EBmods motor.
1st off Peter Marten from TKO has been so helpful and has taught me alot over the past few weeks out at Revelation Raceway racing and testing.
I am currently running both Race Prep engines in my buggy and truggy.
My buggy is getting over 9 mins of run time at Rev and 11 at Hot Rod Hobbies(smaller track) The motor is super linear and smooth just rolls off the bottom and has no problem clearing the massive Triple at Rev from the inside line.
I am running an p4 plug, 086 pipe and EBmods 30% fuel. Idles like a champ consistant tune and pulls everyone down the straight.
Did i mention i have 5 gallons on this thing!!!!!
If you race at Revelation and need any help with your JS let know.
1st off Peter Marten from TKO has been so helpful and has taught me alot over the past few weeks out at Revelation Raceway racing and testing.
I am currently running both Race Prep engines in my buggy and truggy.
My buggy is getting over 9 mins of run time at Rev and 11 at Hot Rod Hobbies(smaller track) The motor is super linear and smooth just rolls off the bottom and has no problem clearing the massive Triple at Rev from the inside line.
I am running an p4 plug, 086 pipe and EBmods 30% fuel. Idles like a champ consistant tune and pulls everyone down the straight.
Did i mention i have 5 gallons on this thing!!!!!
If you race at Revelation and need any help with your JS let know.




