R/C Tech Forums

Go Back  R/C Tech Forums > General Forums > Nitro On-Road > Onroad Nitro Engine Zone
Ofna Picco/Jlr .12 EVO 3 RED DOT >

Ofna Picco/Jlr .12 EVO 3 RED DOT

Register
FAQ
Community
Wiki Posts
Calendar
Today's Posts
Search
Vendor Directory

Ofna Picco/Jlr .12 EVO 3 RED DOT

Thread Tools
 
Search this Thread
 
Old 04-25-2010 | 03:10 PM
  #31  
Ballistik Mods's Avatar
Ballistik Mods
Tech Adept
iTrader: (1)
 
Joined: Feb 2010
Posts: 200
From: NSW AUSTRALIA
Default picco parts
Guys can anyone tell me where to get parts for the jlr evo 3 red dot in the states.
Ballistik Mods is offline  
Reply
Old 04-25-2010 | 07:21 PM
  #32  
jelayne
Tech Regular
iTrader: (4)
 
Joined: Feb 2006
Posts: 373
Default
You can give Nitrohouse or Kamikaze a check, you would be able to get all that you need.
jelayne is offline  
Reply
Old 04-25-2010 | 08:52 PM
  #33  
dicksmth_2007
Tech Adept
iTrader: (9)
 
Joined: Jun 2007
Posts: 204
From: Claeveland TX
Default
Originally Posted by Ballistik Mods
Guys can anyone tell me where to get parts for the jlr evo 3 red dot in the states.
you cant find a picco parts nowhere but you can get the Mega zx12 parts work. http://ashfordhobby.com
dicksmth_2007 is offline  
Reply
Old 04-26-2010 | 05:09 AM
  #34  
jelayne
Tech Regular
iTrader: (4)
 
Joined: Feb 2006
Posts: 373
Default
http://www.nitrohouse.com/catalog/in...ath=34_129_211

dicksmith aren't these parts ??
jelayne is offline  
Reply
Old 04-26-2010 | 05:16 PM
  #35  
dicksmth_2007
Tech Adept
iTrader: (9)
 
Joined: Jun 2007
Posts: 204
From: Claeveland TX
Default
Originally Posted by jelayne
yes but if you need a rod you can find it but you can do this but the CRANKSHAFT and the HEAD BUTTON is not the same http://www.rcdeal.com/modules/stores...m.php?item=156
dicksmth_2007 is offline  
Reply
Old 04-26-2010 | 05:59 PM
  #36  
Shawn68z
Tech Addict
iTrader: (6)
 
Joined: Jan 2008
Posts: 706
Default
Originally Posted by DK9mm
I bought a new motoer from a fellow member. I am running 20% fuel. The motor came with 4 shims in three different guages. Should I remove the thinnist one if running 20%? I recall reading that these engines are set up for 30% from the factory.

Any help would be appreciated.

Thanks.
Yes. Take .10mm out the head clearance. It if its not the Tuned version then .40mm should be right for 20%.

Shawn.
Shawn68z is offline  
Reply
Old 04-26-2010 | 06:04 PM
  #37  
Ballistik Mods's Avatar
Ballistik Mods
Tech Adept
iTrader: (1)
 
Joined: Feb 2010
Posts: 200
From: NSW AUSTRALIA
Default thanks
Thanks heaps guys for the picco parts info
Ballistik Mods is offline  
Reply
Old 04-26-2010 | 07:47 PM
  #38  
DK9mm
Tech Adept
iTrader: (7)
 
Joined: Feb 2010
Posts: 230
From: Bay Area, California
Default
[IMG][/IMG]
Originally Posted by DK9mm
I bought a new motor from a fellow member. I am running 20% fuel. The motor came with 4 shims in three different guages. Should I remove the thinnist one if running 20%? I recall reading that these engines are set up for 30% from the factory.

Any help would be appreciated.

Thanks.
I take it the .10mm is the really thin one?

The other three seem to be the same........

Here is what I have.. Which one is this....

DK9mm is offline  
Reply
Old 04-26-2010 | 07:49 PM
  #39  
dicksmth_2007
Tech Adept
iTrader: (9)
 
Joined: Jun 2007
Posts: 204
From: Claeveland TX
Default
Originally Posted by Shawn68z
Yes. Take .10mm out the head clearance. It if its not the Tuned version then .40mm should be right for 20%.

Shawn.
what about for 16%
dicksmth_2007 is offline  
Reply
Old 05-01-2010 | 04:56 PM
  #40  
DK9mm
Tech Adept
iTrader: (7)
 
Joined: Feb 2010
Posts: 230
From: Bay Area, California
Default
Originally Posted by DK9mm
[IMG][/IMG]

I take it the .10mm is the really thin one?

The other three seem to be the same........

Here is what I have.. Which one is this....

Can someone tell me which version of the JL this is?
Last edited by DK9mm; 05-03-2010 at 06:25 PM.
DK9mm is offline  
Reply
Old 05-01-2010 | 04:59 PM
  #41  
Shawn68z
Tech Addict
iTrader: (6)
 
Joined: Jan 2008
Posts: 706
Default
Originally Posted by dicksmth_2007
what about for 16%

Same. 16% to 20% doesnt make much of a difference.

Shawn.
Shawn68z is offline  
Reply
Old 05-01-2010 | 06:42 PM
  #42  
LiL_JaSoN
Tech Fanatic
iTrader: (6)
 
Joined: Feb 2007
Posts: 923
Default
how does this engine compare to the Picco P1-R evo3 engines?
LiL_JaSoN is offline  
Reply
Old 05-09-2010 | 10:18 AM
  #43  
DK9mm
Tech Adept
iTrader: (7)
 
Joined: Feb 2010
Posts: 230
From: Bay Area, California
Default
Originally Posted by DK9mm
[IMG][/IMG]

I take it the .10mm is the really thin one?

The other three seem to be the same........

Here is what I have.. Which one is this....

Can anyone tell me which version I have?
DK9mm is offline  
Reply
Old 05-09-2010 | 10:27 AM
  #44  
20 SMOKE's Avatar
20 SMOKE
Tech Lord
iTrader: (103)
 
Joined: Dec 2003
Posts: 10,437
From: HVR_ WEEKI WACHEE FL
Default
it may be the first version of the red dot
20 SMOKE is offline  
Reply
Old 05-09-2010 | 11:00 AM
  #45  
el salvador's Avatar
el salvador
Tech Master
iTrader: (7)
 
Joined: May 2006
Posts: 1,077
From: Western Seattle Bucko!
Default
The top view of the heat sink looks like the 1st version (EVO 2), without seeing the end view of the Crank (Shape of the Scallop), can not be completly sure though.
el salvador is offline  
Reply



Advanced Search

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.