Community
Wiki Posts
Search

8T 2.0

Thread Tools
 
Search this Thread
 
Old 02-27-2010 | 04:21 PM
  #5881  
Frank L's Avatar
Tech Lord
iTrader: (148)
 
Joined: Dec 2008
Posts: 12,520
From: NorCal
Default

Originally Posted by Vareck
Hey Frank that looks like Nitro Pit dirt on that thing Or should I have said Nitro Pit MUDD

You got it. And thats after a hose and aircompressor...
Frank L is offline  
Old 02-27-2010 | 04:39 PM
  #5882  
Integra's Avatar
Tech Lord
iTrader: (8)
 
Joined: Dec 2006
Posts: 12,489
Default

Originally Posted by Frank L
You got it. And thats after a hose and aircompressor...


Slacker...get the scrub brush out and get it shiny.
Integra is offline  
Old 02-27-2010 | 04:46 PM
  #5883  
JAMMINKRAZY's Avatar
Tech Champion
iTrader: (17)
 
Joined: Jun 2007
Posts: 6,575
From: Pittsburgh PA
Default

Originally Posted by Integra
Slacker...get the scrub brush out and get it shiny.
+1. Come on Frank! That's not clean!
JAMMINKRAZY is offline  
Old 02-27-2010 | 07:36 PM
  #5884  
madweazl's Avatar
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Just picked up an RTR, any idea what diff fluid comes stock? Couldnt find it in the destructions or through a search here (though I'm sure I saw it at some point).
madweazl is offline  
Old 02-27-2010 | 08:23 PM
  #5885  
Tech Elite
iTrader: (385)
 
Joined: Aug 2001
Posts: 4,385
From: NW Indiana
Default

I can't wait...I get to run my new truck tomorrow. Does anyone know what pistons come in the RTR 2.0. I wanted to write it down on my setup sheet, but don't want to take them apart yet.
Here's a pic of my painted body that I did in an hour...couldn't run the rtr body.

jonski is offline  
Old 02-27-2010 | 08:38 PM
  #5886  
Frank L's Avatar
Tech Lord
iTrader: (148)
 
Joined: Dec 2008
Posts: 12,520
From: NorCal
Default

Originally Posted by JAMMINKRAZY
+1. Come on Frank! That's not clean!
Awe com on guys gimme a break. I gotta tear it down and replace all the bearings again anyway. The drivetrain won't even spin at all. Like it's glued shut. But that's ok with me it was well worth it and I'd do it again given the chance.
Frank L is offline  
Old 02-27-2010 | 11:08 PM
  #5887  
Tech Elite
iTrader: (14)
 
Joined: Jul 2008
Posts: 2,168
From: SoCal
Default

Jonski the set up sheet that comes with the instructions is the setup the truck comes with. 55 front, 56 rear
Madeazl its 7, 10, 2
DG Designs is offline  
Old 02-28-2010 | 05:30 AM
  #5888  
Tech Elite
iTrader: (385)
 
Joined: Aug 2001
Posts: 4,385
From: NW Indiana
Default

Thanks DG, that's what I thought just wanted to make sure.
jonski is offline  
Old 02-28-2010 | 07:01 AM
  #5889  
Integra's Avatar
Tech Lord
iTrader: (8)
 
Joined: Dec 2006
Posts: 12,489
Default

Originally Posted by Frank L
Awe com on guys gimme a break. I gotta tear it down and replace all the bearings again anyway. The drivetrain won't even spin at all. Like it's glued shut. But that's ok with me it was well worth it and I'd do it again given the chance.


Be prepared to clean rust off the R+P...mine had quite a bit.
Integra is offline  
Old 02-28-2010 | 07:41 AM
  #5890  
neobart's Avatar
Tech Master
iTrader: (4)
 
Joined: Jan 2010
Posts: 1,413
From: Denmark
Default

And be ready for cleaning mud out from the hubs. Somehow the dirt makes it's way in to the space between the two wheel bearings.
neobart is offline  
Old 02-28-2010 | 08:32 AM
  #5891  
madweazl's Avatar
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Originally Posted by DG Designs
Jonski the set up sheet that comes with the instructions is the setup the truck comes with. 55 front, 56 rear
Madeazl its 7, 10, 2
Isnt that the race roller setup vice the RTR?
madweazl is offline  
Old 02-28-2010 | 08:43 AM
  #5892  
madweazl's Avatar
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Any other LiPOs vice the Losi unit that fit the receiver box well? I havent found the dimensions for the Associated pack yet but it looks similar (and runs $10 cheaper for an extra 100mah).
madweazl is offline  
Old 02-28-2010 | 08:53 AM
  #5893  
losi_racer's Avatar
Tech Champion
iTrader: (25)
 
Joined: Nov 2008
Posts: 6,470
From: mesa,az
Default

Originally Posted by madweazl
Any other LiPOs vice the Losi unit that fit the receiver box well? I havent found the dimensions for the Associated pack yet but it looks similar (and runs $10 cheaper for an extra 100mah).
losi radio box is VERY tight, even the losi lipo fits tight, if you go with the losi lipo get the DYNAMITE 2S 7.4v Lipo. Its the same thing as the losi one BUT it doesnt have a safety cut off inside which fails a lot and will cut off even at full charge.
losi_racer is offline  
Old 02-28-2010 | 09:00 AM
  #5894  
madweazl's Avatar
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Originally Posted by losi_racer
losi radio box is VERY tight, even the losi lipo fits tight, if you go with the losi lipo get the DYNAMITE 2S 7.4v Lipo. Its the same thing as the losi one BUT it doesnt have a safety cut off inside which fails a lot and will cut off even at full charge.
I run the Losi unit in the buggy but I just picked up the truggy and need to get another. Was just hoping to find something with a little more capacity for the money.
madweazl is offline  
Old 02-28-2010 | 10:13 AM
  #5895  
madweazl's Avatar
Tech Elite
iTrader: (12)
 
Joined: Oct 2002
Posts: 2,651
From: Nomad
Default

Can somebody confirm the Flightmax packs fit the Losi battery box? Cant beat the price if they're decent batteries.
madweazl is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.